Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Apex 11
#1

I picked up this 1930 Apex model 11 tonight locally. My interest was sparked when I realized the tube lineup is just two 24s
short of my Philco 90. It has 2 ea. 24, 27, 45 and one 80. With a 12" Magnavox speaker I bet it will sound pretty good. For
$50 I figure I can't go wrong.

[Note from admin - Sorry, photos no loger available.]

I flipped the exterior pic on photobucket so don't ask why it's lying down.

Phil aka Philbert Q. Desenex - Twin Cities, MN
#2

That has to be the biggest of the Apex sets. They were made by U.S. Radio and Television, in Marion, Indiana, if memory serves. That compny later was acquired by William C. Grunow, and was re-named General Household Utilities. The radios were then marketed as Grunow radios.

Both the US R&T and Grunow sets were very good radios. They were not unduly complex, and aleays easy to service. The set will surely sound very good, with those push-pull 45's, driving that Maggie speaker.
#3

Doug, the metal "Screen Grid" tag lists Chicago as the address for USR&T, as does the ad introducing this model in Alan Douglas' Vol.1. However, in his
opening Apex remarks he states that all radios were produced at the Marion plant, so perhaps Chicago is a headquarters address.

The same ad references an eight tube model 115 "high-gain neutrodyne" circuit for the same price with five 27s, two 45s and one 80. I have no idea which
is considered the better outfit.

I am surprised to find the word television in a 1930 company name. I assumed most people were not familiar with the term.

Phil aka Philbert Q. Desenex - Twin Cities, MN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 3964 online users. [Complete List]
» 3 Member(s) | 3961 Guest(s)
AvatarAvatarAvatar

>