Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A question of polarity
#1

While searching for a suitable speaker, I've been recapping the Stewart Warner model 1691 / R-172 chassis and have a question on the two 16 mfd electrolytic caps, #25 & 26 on the schematic:

 http://www.nostalgiaair.org/pagesbymodel...021218.pdf

I'm "assuming" #25 has the negative side to ground?

But number 26 has me stumped because the symbol for the capacitor on the schematic is just two straight lines, giving no indication of polarity. Can anyone tell me if the negative side of the cap should go to the speaker plug and the rectifier tube or the positive side? Terry?

Thanks!

Greg V.
West Bend, WI
Member WARCI.org
#2

Positive goes to the rectifier tube and speaker plug, negative to center tap for cap #26

Positive goes to speaker plug, negative to ground for cap #25
#3

Icon_thumbup Many thanks! That's how I had them wired in.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread:
[-]
Recent Posts
Philco model #20
AHH HA , I got it and can’t thank you fellows enough , when I changed the capacitors I took the advice and did not unsol...onlyrick — 02:24 PM
Zenith H725
Hello Ed, yes, I like letting projects run for few days to make sure they don't start acting up . Sincerely Richardradiorich — 01:03 PM
Philco 46-480 Electronic Restoration
I am almost finished with this restoration. All which remains is the power transformer. I cleaned it up some time ago, b...jrblasde — 12:41 PM
Philco model #20
I seem to recall in some TRF sets there being a Local/Distance toggle switch that removes the B+ from the first 24 rf tu...RodB — 09:46 AM
Refinishing Ideas
Hi Doppelganger, After rereading your thread, did you mount the Zenith speakers in the two bottom left and right pos...MrFixr55 — 09:39 AM
Philco model #20
Hi Rick, One other thing regarding volume on this set.  Make sure that the tube shield is in place.  this is that la...MrFixr55 — 08:22 AM
Philco model #20
Hi Rick, The volume control on the Model 20 has 2 sections and does 2 seperate things: One part of the control, ...MrFixr55 — 10:30 PM
Philco model #20
Hello again fellows , well I powered up the set this evening after I had changed every cap and resistor in this set and ...onlyrick — 09:34 PM
Zenith H725
Yes - better it happened on the repair bench than returning to the owner. The other question is - do I also dissect a...EdHolland — 09:08 PM
Zenith H725
That's a bummer but get them now. Paul BPaul Philco322 — 08:27 PM

[-]
Who's Online
There are currently 737 online users. [Complete List]
» 1 Member(s) | 736 Guest(s)
Avatar

>