Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
After over a week of trying to get schedules together, I finally picked up this rather small Zenith console this evening. The guy even met me halfway, saving me some miles and I actually got to try a Steak and Shake for the first time ever during the trip. Overall, the radio seems to be in very good condition with a couple issues that need ironed out. The additional IF can someone added to the back of the chassis seems only linked into antenna wire, with no hacking visible to the chassis. I guess he was selling the radio for his parents who lived in Brunswick, OH and he lives up in Cleveland, which added another issue getting things to jive with his parents to pick up the console. Since this was built the same year as Zenith's Stratosphere and the Baby Strats, I am going to call it the Micro Strat!
I don't think the volume control shaft is supposed to pull out like this! Ouch!
Note: I did have to use a little Auto-Enhance with my photo editor as it seems my camera is dying. It now takes rather washed out pictures. But, the radio really does look about that sharp in person!
Edit: Actually, it looks better in person. Seems even with auto-enhance, the pictures didn't come out great.
No matter where you go, there you are.
(This post was last modified: 06-03-2017, 07:15 PM by Jayce.)
Posts: 4,109
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Cool,
It looks a little like an Airline 62-123.
I like
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
I'm glad you finally got to try Steak and Shake..... next you'll say you've never tried White Castle
Anyway, I'm glad you got that radio, it's one I've never seen before and it looks a lot better in your pictures than the Craigslist ad.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
(06-04-2017, 09:12 AM)Eliot Ness Wrote: I'm glad you finally got to try Steak and Shake..... next you'll say you've never tried White Castle
Anyway, I'm glad you got that radio, it's one I've never seen before and it looks a lot better in your pictures than the Craigslist ad.
Thanks! I also like the size of it and just the overall design.
Yes, where I live there are certain places we just don't have. The nearest White Castle was up near Akron, OH, but it is now gone. Yes, I did get to go there a few times at least. The closest Steak and Shake is about 20 miles away from me up in North Canton, OH.
Now, getting back to the radio, is there a possibility that control can be repaired? I haven't pulled the chassis for inspection yet.
No matter where you go, there you are.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
(06-04-2017, 12:42 PM)Jayce Wrote: .......Now, getting back to the radio, is there a possibility that control can be repaired? I haven't pulled the chassis for inspection yet.
Maybe, but you'll need to pull the chassis and take a closer look at the pot.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
I pulled the chassis and, other than being very gummed up, the pot seemed fine. It basically uses a pressed in shaft to work the control pot, which is odd. After several doses of control cleaner to loosen it up, I was able to press the shaft back in tight enough to work for off-on and volume functions with no issues as long as I don't go wild with it. Radio passed the transformer test and actually pulled in a few stations at low power on the bulbs. All good signs! There are quite a few capacitors crammed under that little chassis though! Almost an un-Zenith like amount!
No matter where you go, there you are.
(This post was last modified: 06-04-2017, 06:48 PM by Jayce.)
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Jayce, I found your little console in my Zenith brochures. In 1936 it sold for $39.95 and the table version, the 4-T--26, sold for $20.00.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 2,026
Threads: 367
Joined: Jun 2010
City: Dover, OH
Ok, I figured it wasn't a high cost model when it was made. Information seems to be hard to find about either version except there was an early and a later version.
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
New Philco Repair Bench
|
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
Made mistake & did not label connection
|
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
Made mistake & did not label connection
|
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM |
Made mistake & did not label connection
|
You'll have to forgive me, I am not sure what you mean. Can you explain what you are really saying. If anyone does not...georgetownjohn — 08:05 PM |
Made mistake & did not label connection
|
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM |
Made mistake & did not label connection
|
Maybe this is starting to make some sense in my hard head. Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM |
Made mistake & did not label connection
|
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM |
Made mistake & did not label connection
|
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM |
Made mistake & did not label connection
|
Hello John,
I have been there either label got lost or was not labeled !
Sincerely Richardradiorich — 02:15 PM |
Made mistake & did not label connection
|
Sorry, it is a Philco 37-640. Does that help?--Johngeorgetownjohn — 02:14 PM |
Who's Online
|
There are currently 3378 online users. [Complete List] » 4 Member(s) | 3374 Guest(s)
|
|
|
|