Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco - Made in Argentina
#1

The vertical indications on the dial are call letters for the regional stations for Argentina and Uruguay. Not mine, belongs to my buddy Mario.

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
#2

Now that's cool! The cabinet is identical to the USA 46-431, but the tuning range is different (and the scale is backwards compared to the 46-431).

--
Ron Ramirez
Ferdinand IN
#3

I didn't note what model number they called it. The decals around the knobs like "VOLUME" are in English so maybe the cabinet was imported but the chassis manufactured locally. There's many such combinations down there with Zenith, RCA, Philco as well as some of the European brands.

Here's another weird bird. The escutcheon carries some name other than Philco. Could be that somebody replaced it along the way? The chassis has been hacked up for miniature tubes so its impossible to really identify what it was originally.
#4

Now THAT is an oddity for sure! It looks like a Philco Jr. Model 81, yet it has an inset control panel instead of the flat front used on the USA Model 81 sets.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4126 online users. [Complete List]
» 1 Member(s) | 4125 Guest(s)
Avatar

>