Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grunow 1151 console
#1

Was given a Grunow 1151 console a while ago it has been sitting in the garage and I thought why not bring it upstairs and clean it up a bit to see what it looks like. This thing is heavy as he__. The cabinet is not the best I will clean it up and see. What do you guys know about these radio sets? It has 3, 45 tubes in it I think. The speaker is not original to the radio but there is a tall thing on the bottom of the cabinet that hooks up to the speaker. This part might be why the radio is so heavy. Whatever you can tell me about the set will be helpful. Thanks in advance!
#2

Like picking a car engine eh??
As things go pretty standard fair for a mid end mid 30's set. Uses 6v tube til you get to the output stage then it switches to a pair of 45's (2.5v jobs) Would have expected a pair of 42's either triode or pentode connected. Seems the have a bfo too.

http://www.nostalgiaair.org/pagesbymodel...008334.pdf

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
And so does a barber shop quartet. mmmmmmRodB — 03:54 PM
Shadow Meter Bulb
I did try an LED bulb in place of the original but wasn't impressed with the amount of light on the dial. Seems like it ...RodB — 03:51 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Would mounting he transformer vertically change the hum, if used without additional parts? Also, in these amps...morzh — 02:25 PM
Shadow Meter Bulb
Gary I doubt it would introduce any noise. We use similar lamps for the panel indication, 12V AC lamps: they are LEDs...morzh — 02:15 PM
Shadow Meter Bulb
Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM
Shadow Meter Bulb
Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM
HiFi (Chifi) tube amp build - but my own design.
Tim, nice write up and thanks for sharing !! Sincerely Richardradiorich — 02:47 AM
HiFi (Chifi) tube amp build - but my own design.
Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM

[-]
Who's Online
There are currently 7343 online users. [Complete List]
» 2 Member(s) | 7341 Guest(s)
AvatarAvatar

>