Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What model is this? Found one locally. 116B?
#1

Dial/speaker does not add up.


Attached Files Image(s)
       
#2

Not even close to 116B, though the year is the same.
It is a 630.
We could look at the grill.
But you might want to show the chassis also.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

That's the only two pics posted, he says it is that, but the 116b shows difference. Says it powers up, no reception, what would it be worth?
#4

(by the look of the cabinet the same one was used in 635).

Worth? Depends. If the speaker is good - $70, +/- 10 bucks. If it is 630. Do not know what 635 would be. Probably less.

If it were 116B, which it is absolutely not (it is a very different and much larger unit) it would get above $200 if in decent shape.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Thanks, I think that's it, 116b 11 tubes vs 6 in this one, never heard either, guess the 116b kills it. Is this one worth collecting or just so so?
#6

It is a good radio. I have a 620, one step down, still good. I actually like the 1936 radios.
As for worth.....the beauty is in the eye of the beholder - if you like it, it is worth collecting. My personal criterion.
For example, I am not a fan of the 610 look, to chubby for me. So I do not have it.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Dial bezel is on upside down...

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Yeah...I was wondering myself where the heck the Shadowgraph window was......

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2140 online users. [Complete List]
» 1 Member(s) | 2139 Guest(s)
Avatar

>