Just bought a Philco 624 Farm Radio
Posts: 10
Threads: 2
Joined: May 2020
City: SANDY
State, Province, Country: UT. USA
I just bought a Philco 624 farm radio. !936 floor model and I love the cabinet! I am hoping to restore it but I am clueless when it comes to electronics. I live in Utah near Salt Lake City. I would love to take it to someone who could work on it. If you know anyone please let me know.
I understand there is some way to convert these to use a wall plug. It also looks like the Philco 645 chassis is the same? I would rather convert the original but I would replace if necessary.
Who should I talk to about getting this thing converted and working or buying a chassis for it that is already set for 120 volts? I know it won't be cheap to repair or convert. It needs tubes and I have sent the list of tubes I got from the service manual to a friend that deals in tubes. I think someone said Tube Depot might be a place to look too.
Thanks in advance.
Posts: 5,088
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum!
There are some restorers listed in the Resources section in the Philco Library. All those listed would require you to ship the chassis to them as they are not in Utah. A quick Google search turned up a shop in Utah http://thattubesound.com/
I know nothing about the shop or whether they are still operating. perhaps some other folks will have other ideas.
Posts: 10
Threads: 2
Joined: May 2020
City: SANDY
State, Province, Country: UT. USA
Hi Bob,
Thanks. In all my excitement yesterday I forgot the most basic of things and didn't do a google search. I'll check out that link. Thank you. I might end up having to ship it out and I'm ok with that. I'll check some of the restorers too.
Posts: 15,837
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Bob, Nathan, the bug has struck again.
Greg, please don't edit the 1st post of yours before the admins could take a look at it.
There is some bug we are trying to figure out.
Mike.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 05-04-2020, 12:56 PM by morzh.)
Posts: 10
Threads: 2
Joined: May 2020
City: SANDY
State, Province, Country: UT. USA
I joined a couple of forums yesterday. I wasn't sure if I posted in here or not so I posted my first post again. My apologies for my lack of patience.
Posts: 7,288
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hi Greg and welcome,
Congrats on your new acquisition! It would be pretty simply to build a plugin 6v dc power supply to power your farm set. Or you could buy a pre 1955 car or an old tractor to power it. The more difficult part is getting the old guy working.
Here's the technical stuff abt your set: http://www.nostalgiaair.org/pagesbymodel...013809.pdf
You might find this interesting. Windchargers were used in some instances to the 6v battery charged up. https://wincharger.com/
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 05-04-2020, 01:23 PM by Radioroslyn.)
Posts: 10
Threads: 2
Joined: May 2020
City: SANDY
State, Province, Country: UT. USA
Thanks for the welcome and the link. I managed to find that link. My biggest issue getting this thing up and running is that I know very little about electronics. Not even enough to be dangerous. I will be sending it out to have someone do that part of it anyway. The wood part I can do on my own.
(This post was last modified: 05-04-2020, 02:13 PM by GregP.)
Posts: 15,837
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Greg
Wise decision.
One of the things that separates men from boys is knowing one's limitations.
I, for instance, know better than to do my own cabinetry. Or abdominal surgeries.
I stick to specialists.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
--
Ron Ramirez
Ferdinand IN
Posts: 1,874
Threads: 212
Joined: May 2015
City: Seattle
State, Province, Country: WA
Morzh - I will follow up with GregP about the editor issue via PM.
Posts: 10
Threads: 2
Joined: May 2020
City: SANDY
State, Province, Country: UT. USA
@Morzh. Yes those abdominal surgeries can get complex and tricky!!  Always a wise decision.
@Ron. Gotta follow what Clint says. I'm by no means afraid to admit I don't know how lol
Thanks for that smile this morning.
(This post was last modified: 05-04-2020, 02:31 PM by GregP.)
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Made mistake & did not label connection
|
| Hi John,
I don't have this radio, but I can supply some info:
Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM |
|
New Philco Repair Bench
|
| As far as I know, the Repairbench does not work, and has not been working in a while.
Chuck (we had that campaign looki...morzh — 01:33 PM |
|
Radio city products 664 schematic request
|
| Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM |
|
New Philco Repair Bench
|
| Thanks Gary.dconant — 12:16 PM |
|
New Philco Repair Bench
|
| I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM |
|
New Philco Repair Bench
|
| I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
|
Made mistake & did not label connection
|
| It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
|
Made mistake & did not label connection
|
| I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM |
|
Made mistake & did not label connection
|
| You'll have to forgive me, I am not sure what you mean. Can you explain what you are really saying. If anyone does not...georgetownjohn — 08:05 PM |
|
Made mistake & did not label connection
|
| Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
