Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater Kent model 20 Big Box
#61

TTech, I hope you don't chuck the project, nor leave this thread, much less the Phorum. I am enjoying hearing about your progress with this radio. Perhaps you have already figured these things out, but you mentioned the rehostats being dirty. You may find that cleaning them with Marvel Mystery Oil and a toothbrush will help a lot. Once they are cleaned, a light coating of petroleum jelly will prevent them from becoming oxidized again. That is what the A-K literature recommends for lubrication. The MMO is my own solution for such things. Be sure to dry it off before applying the petroleum jelly, or it will dilute it, although it won't really cause any harm. Good luck, and I hope to hear about your further progress, and maybe see some pictures of the completed radio, or even a video of it working on YouTube. I have posted a couple of videos of my own completed projects there. Folks seem to enjoy seeing them.
#62

Sorry folks - after discussing it we have decided to close this thread since it is no longer a polite discussion about the original topic.

Please make our jobs easier (as moderators) and treat each other with respect - and follow the Phorum rules:

https://philcoradio.com/phorum/showthread.php?tid=4586

None of us want (or enjoy) closing threads, deleting posts or otherwise adjudicating between Phorum members.

Thank you.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>