Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

FM Conversion?
#1

Hello Ron, I've got my 41-287 operating again and sounding great but I really miss FM. Would it be possible to add an FM tuner to this radio maybe connecting it through the "Television" feature switch? Many years ago I built an Eico FM tuner kit which I wired into a Magnavox hifi . Has this ever been done on an antique radio? Thanks in advance for any information, JEP
#2

There were a number of FM converters sold in the 60's for car radios that would work with AM radios, and send the siignal to the AM radio. Haven't seen one in many years, but they were cheap and plentiful in their day. Probably some still around.
#3

And don't forget the Pilotuner (T601) if you want to stay within the same timeframe. The generally only fetch $20-30 on ebay and are simple to get going. Better still is the Howard unit, model 482. Both of these deliver an audio output suitable for the inputs of many old radios. I use a Howard with my Midwest 16 tube 'table' set. Icon_smile



Note from site admin: Sorry, but the photos which were attached to this post are no longer available.
#4

Thanks, codefox and exray. So far no luck on e-bay but will keep trying. JEP




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4103 online users. [Complete List]
» 2 Member(s) | 4101 Guest(s)
AvatarAvatar

>