Radio-Phonos with Home Recording
Posts: 146
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
I don't think I have ever seen a Philco (or any other brand) of radio-phonograph with home recording. Are those relatively rare? Have you ever seen blank disks and cutting styli sold at meets or online? I do not own any radio-phonographs but owning one that records might be interesting. I can imagine demonstrating one for a friend by putting on a 78 which plays, say, "You Turn Me On, I'm a Radio" by Joni Mitchell or "Caravan" by Van Morrison.
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
I own an RCA RE-57 radio/phonograph with recording capabilities from about 1930.
I haven't restored it, so I don't know how well it worked.
There was a record recorded by the original owner with it, but it wouldn't play on my other phonographs.
https://www.radiomuseum.org/r/rca_re_57_victor.html
Carl
Northern Panhandle, WV
Posts: 146
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
Carl Travis Wrote:There was a record recorded by the original owner with it, but it wouldn't play on my other phonographs.
Will your other phonographs play commercially released 78s?
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
Yes, one phono would play 33, 45 or 78's and the other would play 78's only.
Carl
Northern Panhandle, WV
Posts: 146
Threads: 8
Joined: Apr 2023
City: Roanoke
State, Province, Country: Virginia
I would suspect a problem in the home recording that you have. As a rule those have to use the correct stylus, and that stylus has to be set for the correct cutting pressure. Those are probably the two most like causes of it not being playable on a turntable. I haven't dealt with home recording turntables in more than 50 years, and they weren't actually for home recording - they were for cutting 16" transcription discs at my college radio station.
Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA
https://plymouthcolony.net/starcity/radios/
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
Hello Carl Travis
Could you please provide me with documentation of the RCA RE-57 recorder?
I only see data from the radio.
Thank you.
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
I don't have any other documentation on this radio/phono, but heres a link to an old discussion about it:
https://www.antiqueradios.com/forums/vie...hp?t=44066
There is more documentation on the Radiomuseum website cited in my original response.
Carl
Northern Panhandle, WV
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
Posts: 29
Threads: 7
Joined: Aug 2014
City: España
I have been looking at the link and it seems that the system is somewhat obsolete for our days.
Another question, the engraving head, what system does it have, glass, ceramic, magnetic?
Thanks again for your attention, and forgive my lack of knowledge.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 3916 online users. [Complete List] » 3 Member(s) | 3913 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|