Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cool Find/Looking for info
#1

Hey all! I found this beauty for $20 today and she plays! I'm amazed! She needs a new needle and is having some record return issues that need to be solved, but I've been impressed. Does anyone know what model this is? I found a model number in the body of the cabinet but haven't been able to find it anywhere online and it isn't in the lineup of models that I've seen for the year that this would likely be based on the model number. The number on the inside of the cabinet is part no. 51-313316.

I'm also happy to take suggestions on why the record return isn't engaging at all.

Thanks!


https://photos.app.goo.gl/bBmhYqygehb7PM88A
#2

Hi and welcome to the Phorum,
I couldn't find a pic of it w/model attach. What you are looking for (model #) is going to start w/a letter and have 3 or 4 digits after it. I believe the # you found is the part # for the cabinet. It may be located on a tag or stamped in ink on the chassis. Best guess is it's from about 1961 or 62.

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Honestly, I don't know where to begin to look for a model number. I can see a variety of part numbers, for tubes, the idler wheel, speakers, etc. There's a slip of paper in the back that details how to connect the external speakers and on that paper is TP60-0506 which I googled but haven't been able to find.

I've added some more photos to the link above.
#4

I know this is a very old post, but the question still remains. They DO NOT MATCH up. My 144 Philco has 4 bands and if you match up the dials the top Short Wave in the middle do not line up. The first two bands do I believe but the short wave will not track correctly.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 60 Power Trans
Hello, The HV winding on the trans is about 700 volts no load. My meter (Fluke 115) only reads to 650 volts so I meas...dconant — 04:18 PM
New find. 91X code 225
Thanks all. To be honest I don’t know what to make of it being in this cabinet style but I like it a lot. I specifically...pdieten — 12:47 PM
New find. 91X code 225
Nice grab! It appears to be a 19X cabinet. This wasn't unusual. Philco often retrofitted to other cabinets as invento...GarySP — 12:32 PM
1949 Motorola 5A9M
I would certainly write down step-by-step the progression of disassembly of the works, and probably cuss out the electri...GarySP — 12:18 PM
New find. 91X code 225
Nice looking! This annotated schematic from our library shows parts that are slightly different in the early and later ...klondike98 — 11:33 AM
1949 Motorola 5A9M
LOL!! Well Arran, if you do dive into it and come across any advice on dealing with accessing components let me know. I...klondike98 — 11:56 PM
1949 Motorola 5A9M
Bob and Gary; I have the further complication on the Phillips that they decided to use some 200 volt rated paper caps...Arran — 10:05 PM
1949 Motorola 5A9M
Thx Arran & Gary. Yes its super crowded in the chassis and I've debated whether to try to restuff caps or not. I t...klondike98 — 07:40 PM
1949 Motorola 5A9M
That's got to be one of the tightest conglomeration of components I've ever seen! I wonder how the line workers felt bu...GarySP — 05:46 PM
1949 Motorola 5A9M
Bob; I think that the Phillips was actually manufactured in Canada, though they may have imported many of the compone...Arran — 02:28 PM

[-]
Who's Online
There are currently 1287 online users. [Complete List]
» 1 Member(s) | 1286 Guest(s)
Avatar

>