Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

16B question
#1

Hello all. I know there are several different versions of this radio. I have a later shouldered version but don't know much about the earlier ones. I went to look at one for sale today that seems to be priced right and want to make sure the chassis is the correct one for this radio. I didn't have a camera with me but it is the version with the slightly arched top. I found photos of the same radio, and the same chassis online. Is this chassis correct for the radio shown? I know alot have been swapped over the years.

Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
#2

Hi,

Yes, that is the correct chassis for that cabinet. Go for it...and good luck!

--
Ron Ramirez
Ferdinand IN
#3

That is a nice cabinet.

-Mars
#4

Thank you both for your responses!
#5

An early model tombstone with the 5 band chassis! Very nice!
#6

TA Forbes Wrote:An early model tombstone with the 5 band chassis! Very nice!
Thank you for the reply. I'm hoping to get all four versions and the 116 someday. I have the 116 chassis and speaker so I guess I'm part way there on that one Icon_biggrin
#7

With all the recent discussions on the Phorum regarding Model 16B, I coincidentally stumbled across one for sale just like the one in photo above. Are these rare? What's a fair price for one in fair to good condition?

Thanks.
#8

Best to watch Ebay for the going rate. I don't think they would be considered rare as I see quite a few for sale. The later shouldered cabinet seems to be the hardest to find. I saw one like this sell for $275 in unrestored but nice condition and I've seen ones sell for much more. They are great sets when restored correctly.
BTW..... You are fairly close to me. I grew up in Santa Barbara and have a brother who still lives there.
#9

If it's complete and the cabinet in good to excellent condition, I would say between $150 to under $300, fair condition maybe between $100 to $200. Parts missing and a rough cabinet would obviously make it worth less. Fleabay is all over the map, I saw one in semi complete but rough condition go for over $400 (way too much) but saw another in much nicer condition go for under $275. I remember this because a guy on the other forum was trying to argue that the $400 beater wouldn't need over $200 worth of work and materials which was laughable, that was quite an assumption to make on a set with a rusty chassis. I work by the ALASP principle, even though these are an excellent series of sets they are not rare, not extremely common like a model 620 but they do come up on a regular basis, if you can't get one for the condition and price you want just wait a while.
Regards
Arran
#10

Yes I'd say Arran's prices are probably closer if you don't shop Ebay as I found all of mine in his price range. Just picked this one up for under $200. The cabinet has been stripped but it included the "getting hard to find" grill cloth. The chassis plays very well and was completely recapped. I really like these 16B's Icon_biggrin

Note from site admin: Sorry, but the photos which were attached to this post are no longer available.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Rogers Majestic R-646
The output 45s are still in push-pull because the transformer secondary winding is still in the grid circuit providing o...RodB — 11:52 AM
Rogers Majestic R-646
Thanks RodB for the help. But this is not a real solution to this situation, not even a temporary one. Because the firs...Vlad95 — 11:34 AM
Philco Model 16 wiring question
I was going to check the voltages as you suggested and hooked it up to my dim bulb. It appears I have a short. The bul...bobclausen — 10:34 AM
Rogers Majestic R-646
You can bypass the interstage transformer by disconnecting the primary, connect a load resistor of about 10k - 20k to th...RodB — 09:40 AM
HiFi (Chifi) tube amp build - but my own design.
So, here's Prince on stage halfway through Purple Rain when he stoops down to his tech and says "Rod, pull out that...RodB — 09:17 AM
Rogers Majestic R-646
Today I finished inspecting all the parts. The result is not very pleasing. The first positive news: 1) The power tr...Vlad95 — 11:40 PM
HiFi (Chifi) tube amp build - but my own design.
Well, found muh culprit. After using socket test adapters and finding voltages all ok, swapping 6V6s, no avail, swapped ...TV MAN — 11:18 PM
HiFi (Chifi) tube amp build - but my own design.
Well, maybe - maybe not  :lol: It's been an interesting project so far! Something so simple, yet so cranky. The 1st one ...TV MAN — 05:12 PM
1949 Motorola 5A9M
Haven't thought of Burgess batteres in a while  https://www.radionostalgia.ca/lib/Images/battery/us/burgess1D.jpgi ...Vlad95 — 03:50 PM
Philco Model 16 wiring question
Measure the voltages first, just in case.morzh — 02:19 PM

[-]
Who's Online
There are currently 1122 online users. [Complete List]
» 2 Member(s) | 1120 Guest(s)
AvatarAvatar

>