Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Misterious Philco TV
#1

Hello to everyone, first time here, and seeking help from your knowledge. Icon_waveIcon_wave
On my usual scavenging I recently saved from the garbage bin an old Philco tv set, by the looks from around '70s, and i wanted to sell it on Ebay, so that two people could profit from it. Icon_mrgreen The problem is, i couldnt find ANYTHING on this model, nothing at all. The TV, pictured below(i can do more photos if needed), is a BN112 black&white, apparently produced here in Italy, has a dozen of channels buttons, and power, volume, bright and contrast controls. It works, although with the arrivl of DTB can't receive a thing (i hooked it to a friend's SNES Icon_e_biggrin ). I'd like to get some info, if you have some, to use in my auction, and also if you could suggest me a reasonable price, since i see many exxagerated requests, as you discuss in this specific board.
If it's not the right board, i apologize.
Thanks in advance for any help you could provide!Icon_smile
[Image: http://img27.imageshack.us/img27/6560/philco.jpg]
#2

I knew the Philco brand continued in South America, but wasn't aware they had a European presence. Sorry, can't help you out with any info.
#3

Well, i remember Philco advertising from when i was little, but didn't know they actually were built here in Italy too. On another auction i saw a tv with almost identical chassis but another brand, so it might be one of those "build the same product for many brands", but didn't think it happened at the time too.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM
Restoring Philco 96
Oh wow! Just found this thread.  Brings me back to early days on this phorum.  I did a 96 back in 2017.  Thread here: ...rfeenstra — 06:05 PM

[-]
Who's Online
There are currently 2874 online users. [Complete List]
» 1 Member(s) | 2873 Guest(s)
Avatar

>