Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My 60L before and after.
#1

My Philco 60L returned home tonight. I had it given to me a while back and gave it to a friend for a while. Well, he decided to give it back to me and he started work on it before I got the whammy electric bill and work cut me to two days this week. Anyways, I mostly traded for the repairs which included recapping the unit, replacing the grill cloth with a presentable one off a 50's console that was junked out, finding a usable speaker, rewinding two of the coils, and replacing the knobs and the number 75 tube which decided to die right after the radio was repaired. Also the missing escutcheon was found jammed in front of the chassis.

Here is before:

   

And now:

   

No matter where you go, there you are.
#2

I swapped out the 60L with the Atwater-Kent in my bedroom this morning. Definitely a better little console more suited to the smaller room. Performs quite well for a five tube radio.

No matter where you go, there you are.
#3

The little 60 is a pretty good player. I've got one in a BG cabinet and a 66 in a moderne cabinet. The 60 as been working years and years. The 66 the cabinet is a mess and haven't had a chance to have a look at chassis. The 60 and 66 are kinda same but the 66 has much better SW coverage.
Terry
#4

I should try and track donw a 60 Baby Grand to go with my console now! Icon_biggrin Once I get some money back ahead. I'll have to look up the 66 and see what it looks like. I know I've been playing the heck out of my 60L since I got it home last night and am tracking down some spare tubes out of my stash just in case one decides it has had enough. Icon_smile

No matter where you go, there you are.
#5

Very nice Icon_thumbup I noticed your escutcheon and knobs are a different (earlier?) style than mine. Your cabinet looks to have higher quality veneer too.

[Image: http://farm4.staticflickr.com/3104/57171...13e9_z.jpg]
#6

Really neat, Jayce! Icon_thumbup

Bob, the 60L remained in production through the 1935 season, so since yours has the bakelite escutcheon and hex knobs, it was produced during the '35 season but after the switch from a brass escutcheon to bakelite. And it's the small escutcheon, so it was probably produced sometime between the summer of '34 and the end of December '34.

--
Ron Ramirez
Ferdinand IN
#7

The friend who repaired mine said he saw a stamp on the chassis or original speaker that said '1934'. If that is true mine was probably produced early that year. It's just nice to have it back together again and I do still have the original speaker with hopes of having it reconed someday. It was ripped to shreds.

No matter where you go, there you are.
#8

I posted the before and after pictures of this radio on my Facebook page and today I have had coworkers stop me to compliment the radio and my friend's work on it. The 60L has become my daily driver console in my bedroom. The entire family here in the house seems to really like it. Icon_smile

No matter where you go, there you are.
#9

It is always super when they turn out swell, enjoy it. Hope it brightens things up for the rest of the winter.

Paul

Tubetalk1




Users browsing this thread:
[-]
Recent Posts
[split] New member...
Well, with the replacement tuning assembly, I have finally put the unit back together and aligned the dial.  The first s...HowardWoodard — 01:01 AM
Philco Model 16 wiring question
Well, finding a short is easy. Like I said, disconnect the transformer's secondary windings and see if it persists. If...morzh — 09:48 PM
Restoring Philco 96
Nice one!Stan the Man — 09:37 PM
Restoring Philco 96
I have eventually replaced the speaker and shot the video, which only shows the upper part of the dial as the hum is ver...morzh — 09:24 PM
Rogers Majestic R-646
Kinda weird to see both open Nothing weird if you remember that this radio is about 100 years old  :)Vlad95 — 07:49 PM
Philco 42-345 Restoration/Repair
I believe I'm making progress, resistors have been rechecked and corrected, removed that ugly blue capacitor and more wi...osanders0311 — 07:38 PM
Philco Model 16 wiring question
Thanks Morzh Yes I recapped everything and replaced almost all the resistors as well. I redid #99 with .015 safety ca...bobclausen — 07:11 PM
Philco Model 16 wiring question
Well...pull out every single load of the transformer. For every winding. Unsolder if needed. Then re-do your dim bulb....morzh — 07:02 PM
Rogers Majestic R-646
Kinda weird to see both open, but once you get it up and running, really pay attention to your sound. Listen for loud cr...TV MAN — 06:59 PM
Rogers Majestic R-646
Vlad; I was just reminded of something else, I'm not sure why but many Rogers built sets do seem to have open primari...Arran — 04:40 PM

[-]
Who's Online
There are currently 1372 online users. [Complete List]
» 2 Member(s) | 1370 Guest(s)
AvatarAvatar

>