Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 640 - Caps in RF Transformer - Need Values
#1

According to the literature I have the descriptions for diagram #'s 16 & 17 state "Condenser, Part of 11". 11 is the RF transformer. No value is given for these caps in the parts list or in the schematic. I have not torn into the chassis yet. I'm just trying to put together my shopping list so I can order the parts I need. Anyone know what the value of these caps are?

[Image: http://antiqueradios.com/gallery/main.ph...alNumber=1]

Thanks,
Geoff
#2

Those look like mica resonating caps for the coil winding. I would just as well leave them alone as they are usually pretty reliable and most likely are a selected value.
#3

Agree: I would not touch anything in there unless absolutely warranted.
#4

Sounds like good advice. As I start tearing into it I'll try and determine what the values are and update this post for anyone else that may want to know. But I'll leave them in place.

Thanks,
Geoff
#5

Those are trimmer caps as indicated by the symbol. They really don't need to be messed with.
#6

13 & 14 are trimmer caps since they have the arrows on them but I don't think 16 & 17 are since they do not have the arrows. I'm not positive of this since I have not dug into the electronics yet.

- Geoff




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM
two videos to watch VHS and history of TV
Hello Every, Here are a couple videos right up my alley VHS and the history of Television . history of VCR VHS Hi...radiorich — 02:13 PM
Made mistake & did not label connection
You haven't given us the model number of the set so I looked up the 6A8 pin assignment. Pin 8 is the cathode and pin 7 i...RodB — 01:19 PM
Made mistake & did not label connection
Happy Thanksgiving all! I have made a real bonehead mistake this time. Hope someone can help.  I am trying to determi...georgetownjohn — 12:51 PM
New Philco Repair Bench
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM

[-]
Who's Online
There are currently 4838 online users. [Complete List]
» 2 Member(s) | 4836 Guest(s)
AvatarAvatar

>