Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

westinghouse wr-370 console
#1

Today I found a interesting console..And I do not ever remembering anyone on the phorm talking about westinghouse radios. Is this radio a good performer? The radio chassics has a bit of rust. The cabinet of the radio is in good shape along with the grill cloth..Has anyone else seen or heard this radio play? Icon_confused:
#2

Whats wrong no one can help me out? I hope someone will grt back to me with some information before the console is sold.
#3

I'm not familiar with that model. With 12 tubes, though, it should be a good performer. If you like it, go get it! Icon_smile

--
Ron Ramirez
Ferdinand IN
#4

Hi John
From the diagram looks to be a fairly upper end set. It features a rf amp, separate mixer/ osc tubes, P/P output with a phase inverter tube (unlike most Philco sets) , push button tuning and a phono. Haven't worked on many of the 1940's Westinghouse so don't know if It has rubber wiring. If the price was right I'd get it.
Terry
ps and an Eye tube too!!!
#5

A picture or a link would help so we'd know what the radio looked like. But like Ron said, if you like it, then go for it...

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

This has been my approach all along. If I like it, the performance be d**ned.
With that many tubes it cannot completely suck.
#7

Going to go back to the consignment shop today (Wed) hope it is still there It was only $25.00. Thanks guys for the incouragement...Lets see what happens when I get it home! I was told by the wife "we have no more room" when we saw it a couple of days ago.
#8

...and you listen to your wife? Aah, sneak it in when she isn't home a'ready. Icon_wink

But seriously, $25 is a nearly giveaway price, especially for a 12-tube radio...good luck!

--
Ron Ramirez
Ferdinand IN
#9

With the cabinet in a good shape and 12 tubes for 25 bucks.....performance is no longer of interest!
Are you kidding me!
Go and grab that before I go and grab it (OK, not I but someone who is close).
#10

The Radio was still for sale. Took it home and the little women gave me a big stare. I told her dont get your panties in a bunch, it only cost me $25.00. She just walked away an did not say anything.
#11

Well, you got the radio! Now, I wonder how much grief she will eventually give you over it...

No matter where you go, there you are.
#12

Looks pretty nifty.....good luck.
http://www.radiomuseum.org/r/westinghou_wr370.html

Paul

Tubetalk1
#13

Searching in RMorg, I don't see that Westinghouse ever sold a console bigger than 12 tubes before WWII. There were 2 versions; in '37 there was single-IF with AFC, and in '38 there was two-stage IF, no AFC.
#14

Guys the cabinet is in really good condition, maybe a little GOJO to get it cleaned up. But the innereds of the radio has a little bit or more than a little bit of rust. It must of have been stored in a damp place. Hay but for $25.00 Lets see .....No loss or gain...If the tubes check out OK it was a win...win....




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM
Philco 38-7 Speaker
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM
Philco 38-7 Speaker
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM

[-]
Who's Online
There are currently 2735 online users. [Complete List]
» 2 Member(s) | 2733 Guest(s)
AvatarAvatar

>