1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
48-482 push button coil winding specs ?
mikethedruid
Banned
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
#1

08-07-2014, 04:37 PM
Would anybody have the winding specs for the coils in the push button assembly for the 48-482 ? The gauge of the wire for each coil and the number of turns is what I mean. The coil for the lowest frequency button on mine is damaged, and, if I had the spec I could rewind it. If anybody has the information, I figure it would be useful to all us 48-482 owners to have a reference for all of them.
Find
morzh
Odobenus rosmarus
*****
Posts: 15,610
Threads: 550
Joined: Oct 2011
City: Jackson, NJ
#2

08-07-2014, 05:10 PM
Mike

can you count turns and measure the bobbin diameter?
The wire gauge is not that important as long as you can keep the average area of the winding the same which is simple if it is one layer coil.
(This post was last modified: 08-07-2014, 05:12 PM by morzh.)
Find
jerryhawthorne
Phorum Expert
*****
Posts: 1,562
Threads: 56
Joined: Nov 2008
City: Sedona, AZ/Placentia/CA
#3

08-07-2014, 07:03 PM
You might try a posting in the WTB, certainly someone has a parts chassis. Of course the simple approach is just one push button for tuning that does nothing. Not good I know!
Jerry
A friend in need is a pest!  Bill Slee ca 1970.
Find
Phlogiston
Radio-Fixer-Upper
*****
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
#4

08-08-2014, 10:07 AM
morah is right. Just count the turns and the direction of the wind and use some 36.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Website Find
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok 288x
One problem i noticed is there is no real voltage on the 31 caps, 20uf elec. On the probes, good machine X1=8ohms X10...daveone23 — 02:50 PM
Replicating (dogbone) resistors what method have you used ?
John did you see the domino style capacitors that he made too. No, I did not see those Richard. I'll have to try and...Eliot Ness — 02:19 PM
Philco 89B code 123 newbie
Back to working on this, pretty much everything is done minus the RF coil, which I'm putting off until last.  Thanks for...Kurt P — 02:07 PM
Does the 20 Deluxe use photofinish?
I recently bought a can of oms and it now says Lo-odor mineral spirits. When I use citrus stripper I leave it on for...RodB — 11:09 AM
Does the 20 Deluxe use photofinish?
It's on a scale of how bad is it compared to... Naphtha, chlorine bleach, mek, and lacquer thinner it's odorless.Radioroslyn — 10:26 AM
Does the 20 Deluxe use photofinish?
Yeah, always wondered why they call them spirits "odorless". It sure enough smell like a gas station.morzh — 10:10 AM
Does the 20 Deluxe use photofinish?
I usually don't do any sanding till all the stripping is done. The veneer on the cabinet is thin and it is easy to sand ...Radioroslyn — 09:49 AM
HiFi (Chifi) tube amp build - but my own design.
As I remember it, the shock from that B+, about 250VDC, felt worse than the shocks I experienced from 220VAC.morzh — 09:14 AM
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. What ty...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM

[-]
Who's Online
There are currently 3363 online users. [Complete List]
» 2 Member(s) | 3361 Guest(s)
AvatarAvatar

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration