Posts: 23
Threads: 3
Joined: Oct 2014
City: Bossier City, LA
Anyone know where I can find a reproduction grill cloth for a 37-93? Haven't seen anything close at radiodaze or the other usual suspects. just recapped it and restuffed the bakelite blocks. After passing dim bulb and smoke test and swapping the rectifier tube...it's SINGING! Picking up stations near and far but it's got a low hum. I have not attempted an allignment (I don't have a signal generator). While on the subject I'd like to hear some sage advice about the best way to go in regard to signal generators. Keep in mind that I'm a hobbiest on a budget but would like to make a frugal investment. Any advice welcome
Dan in Louisiana
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The original pattern for the 37-93 is no longer produced by anyone.
Perhaps you might consider the Diamond Regular from Richmond Designs?
http://richmonddesignsinc.com/grille_cloth_product_page
--
Ron Ramirez
Ferdinand IN
Posts: 395
Threads: 33
Joined: Jul 2013
City: Horsham, PA
Dan,
Congratulations on getting your first (?) radio restoration working.
Posts: 23
Threads: 3
Joined: Oct 2014
City: Bossier City, LA
Thanks Ron for the lead on the grill cloth. Thanks PA yes this is my first restoration..but I have since aquired several others from the land of broken radios that are just learing at me in the room (namely 45L, 39-70, 38-4. This one still has a hum, a speaker practically in shreds and a HOLE in the cabinet big enough to stick 4 fingers in lol. Still lots to do but have to admit I'm excited. Anyone know where I can score a replacement cone? I'm also looking for 4 of the smooth head machine screws that hold the speaker/baffle/cloth on a baby grand???
Posts: 23
Threads: 3
Joined: Oct 2014
City: Bossier City, LA
FYI the posts on this site have been INVALUABLE in the process. Many thanks to all!
Posts: 23
Threads: 3
Joined: Oct 2014
City: Bossier City, LA
With the help of the fine folks on electronic restoration...the hum is GONE! The old girl sounds FANTASTIC! I'm ecstatic at the lack of static! LOL. Now I'm going to get aquainted with the fine folks over in "Cabnet Restoration" and see if I can do something with the 2.5 inch hole in the top and it not look like a five year old fixed it. I'm trying hard to not be giddy lol.
Thanks to all,
Dan
Posts: 736
Threads: 26
Joined: Jun 2013
City: Hayward, California
Dan, tell us what fixed the hum please.
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
I think you will find good advice on what to do about the hole and congrats on getting the hum out.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
(11-18-2014, 04:27 AM)DanH6464 Wrote: With the help of the fine folks on electronic restoration...the hum is GONE! The old girl sounds FANTASTIC! I'm ecstatic at the lack of static! LOL. Now I'm going to get aquainted with the fine folks over in "Cabnet Restoration" and see if I can do something with the 2.5 inch hole in the top and it not look like a five year old fixed it. I'm trying hard to not be giddy lol.
Thanks to all,
Dan
Nice job! It is always a good feeling to have a radio working well
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
