Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

40-165 antenna
#1

All, I'm just starting the restoration on my Zephry radiobar with a 40-165.  The previous owner had partial stripped the cabinet.  When the cabinet was stripped the previous owner removed the speaker but not the antenna, crushing the antenna in the process.  Has anyone ever opened one of these up?  I need to take it apart to remove the dents but I'm not sure what's inside.  Here's a picture of the antenna.
Thanks in advance.
Keith


Attached Files Image(s)
   
#2

here`s some past info
http://philcoradio.com/phorum/showthread...ht=antenna

http://philcoradio.com/phorum/showthread...ht=antenna
#3

Thanks, for the links. At least I know that I'm only dealing with an un-essential shield. How reliable is the capacitor inside the shield?
Keith
#4

That's a mica cap inside so it should be fine.
#5

Keith
There's one of these 40-165 radios on fleebay now for $70 local pickup in Chesterton, Indiana. It even has a good antenna.

!!!!!!!!!!!!!!!!!!!RESISTANCE IS FUTILE!!!!!!!!!!!!!!!!!!!!!!  
                           /\/\/\/\/\/\/\/\/\
                                                     
                                 [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif]  Chris
#6

Well, I got angry last night and fabricated a very stiff paper form to fit inside the antenna shield.  It is now crush proof.  I'm pretty sure a five year old could step on it without crushing it.  I used basswood plywood and presentation board.  Here it is almost together.  Will the paper interfere with the radio waves?
Keith


Attached Files Image(s)
           
#7

Neat! Icon_thumbup

No, the paper will not interfere with reception.

--
Ron Ramirez
Ferdinand IN
#8

Wow ! Very nice solution. Congrats !




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM
Refinishing Ideas
My 37-116 code 121 is the best sounding radio i have...a daily driver. Since we are talking about "changes". ...poulsbobill — 07:18 PM
My Philco 37-116 Restore
Hello, I finally got brave enough to take the cans off the Expander Unit. Got the grid cap wires replaced and back toget...dconant — 06:50 PM
Zenith H725
I got into the first AM IF can today, and found its mica was cracked. Amazing that it was still working. This one makes ...EdHolland — 06:10 PM
Philco model #20
AHH HA , I got it and can’t thank you fellows enough , when I changed the capacitors I took the advice and did not unsol...onlyrick — 02:24 PM
Zenith H725
Hello Ed, yes, I like letting projects run for few days to make sure they don't start acting up . Sincerely Richardradiorich — 01:03 PM

[-]
Who's Online
There are currently no members online.

>