Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

My first bakelite radio!
#1

I got an Airline 14-BR 513B today and she is pretty!
No back and a small crack but she is a great looking design.

No way she is working so a full redo underneath should hopefully help....next spring, lol

Loon at that cap!


Attached Files Image(s)
           

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

I see one coming to you mike  Icon_wink

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Nice! I have the white version of that radio and it is a neat set. Only issue with it is that it has a hum we were never able to get rid of, even with a full recap and checking everything under the chassis.

No matter where you go, there you are.
#4

When I am done with her, I'll be lucky if she hums at all, lol

Good observation Sam... Mike is MIA while he works on my silvertone 45 rat chassis Icon_smile

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

Boy Kirk you are a slave driver poor mike 
Get him an easy one for a change

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#6

(01-13-2015, 12:56 AM)sam Wrote:  Boy Kirk you are a slave driver poor mike 
Get him an easy one for a change

EASY ONE!

I have given him 6 chassis all perfectly cleaned and recapped. Then if they don't work, he gets them.
I dont see him stripping the cabinets before he gives them to me. He is lucky I like him and like doing the cabinets.  That silvertone is a hard one for sure....

Dont worry, I have a bunch of chassis for next time, Muahahahaha!  Icon_twisted

Where the heck are you Mike?? get off ebay and respond.  Icon_lol

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#7

If I could strip and veneer cabinets why would I give them to you! Icon_twisted Icon_mrgreen

What do you want me to say? I did not get any questions.

Nice radio.
If you want me to look at it I will.
Right now I am fretting about that new house of mine, on-going repairs (found a leak in the shower behind a wall while putting new hardwood floong) and upcoming move....I haven't touched a radio in 3 weeks.
#8

(01-13-2015, 10:34 PM)morzh Wrote:  If I could strip and veneer cabinets why would I give them to you! Icon_twisted Icon_mrgreen

What do you want me to say? I did not get any questions.

Nice radio.
If you want me to look at it I will.
Right now I am fretting about that new house of mine, on-going repairs (found a leak in the shower behind a wall while putting new hardwood flooring)  and upcoming move....I haven't touched a radio in 3 weeks.

I knew that would get you on here!!  Icon_lol

Sorry about the leak, I had the exact same issue and had to cut out the soffit as water poured over my ladder onto my patio. UGH! STOOPIT re-bath

Hope the move doesn't kill you.... at least until I get my chassis back  Icon_lol

If you need help, Sam is always available  Icon_mrgreen

I will be moving next tuesday, Wohoo!

Take care Mike  Icon_thumbup

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#9

By moving you mean bringing radios from the garage to the house?
Icon_mrgreen

Well, good, movevis that final straw that will make you happy if it doesn't kill you first Icon_lol
#10

(01-13-2015, 11:24 PM)morzh Wrote:  By moving you mean bringing radios from the garage to the house?
Icon_mrgreen

Well, good, movevis that final straw that will make you happy if it doesn't kill you first Icon_lol

Actually ..... yes,  Icon_lol

More radios than furniture, clothes, kitchen goods, linens etc......

I would hire someone but they would not be nearly as careful with them as they should be.  Icon_e_surprised

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#11

Careful? With THOSE? Why? Icon_mrgreen
#12

Icon_problem Boy I get toss into every thing
But I would help mike   I seen his garage  Icon_thumbup

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#13

(01-13-2015, 11:46 PM)morzh Wrote:  Careful? With THOSE? Why? Icon_mrgreen

Butt head... remember your fat cabinet is here so you may want me to be careful  Icon_lol

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#14

Fat? It is a measly 38-6 cabinet. Ha-ha!
#15

Is that one made by Belmont?

Paul

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM
Philco Predicta Siesta picture over time getting dimmer
I found that the wire insulation was burnt.  The fly back needs corona dope! Why would someone put that there?Platinumblonde36 — 01:09 AM
Philco Predicta Siesta picture over time getting dimmer
This is what it looked like beforePlatinumblonde36 — 01:01 AM
Philco Predicta Siesta picture over time getting dimmer
Platinumblonde36 — 12:58 AM
Philco Predicta Siesta picture over time getting dimmer
Platinumblonde36 — 12:57 AM
Philco Predicta Siesta picture over time getting dimmer
I'm finding some strange things in my set and for the most part it's also original, so I need to start going over everyt...Platinumblonde36 — 12:55 AM

[-]
Who's Online
There are currently 4582 online users. [Complete List]
» 1 Member(s) | 4581 Guest(s)
Avatar

>