Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Design Patent Label
#1

Had not seen one of these before.  
[Image: https://www.dropbox.com/s/16ia6sa3jmg028....jpg?raw=1]

Saw it on an ebay listing for a Philco 70.  Label is on the back arch.  The design patent number shows up in google patents.
#2

That was applied to many Philco 70 and 90 cathedral cabinets (but not all). I don't remember right now if it ever made it onto any 21 cathedral cabinets, but I don't think it did. Although, since the design patent was granted on April 21, 1931, while the 21 was in production, it is possible that some may have this decal. It was also used on the rear arch of many 35 and 46 cathedral cabinets.

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron...shows that I've never had one of those radios! 




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4122 online users. [Complete List]
» 2 Member(s) | 4120 Guest(s)
AvatarAvatar

>