So much for no more consoles...
Posts: 1,521
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Greg V.
West Bend, WI
Member WARCI.org
Posts: 5,060
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
How much is that unrestored original?
(and yes...a very sexy set).
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 142
Threads: 15
Joined: Nov 2008
City: Glenshaw, PA
Very nice radio. Always find the best stuff when your not looking for it. If you were looking for one, you'd never find it! What is the light below the dial between the center knobs?
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Interesting if you look at the high SW band the tuning get more and more condensed as you go higher in fq.
Good looker!!!
Terry
Posts: 1,521
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Thanks everyone. That little light under the dial was supposed to be a station / frequency scroll. It does nothing because it was missing....right now it's just a clear piece of lexan. Basically, it's just a knob that rotated a dial scale that would've had your local station call letters and frequencies so you could easily look them up. More of a gimmick than anything. I may try to make one someday.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 4,639
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
I would guess that what you mean regarding a thorough and a beautiful restoration job was in reference to the electrical side of things and not the cabinet. With regards to the cabinet, quite frankly it reminds me of a typical "Antique Mall" style refinishing job, no grain filler, no tone spray/shading lacquer, satin finish, it may look acceptable but it certainly was not how they left the factory. Sparton sets of that era were no different from any other manufacturers or the time, the cabinets had had shading on the solid wood portions, and a gloss lacquer finish, like a piano.
As for the little dial window, that certainly seems like something Sparton would do, Sparton was never completely sold on the idea of automatic tuning mechanisms, even on their large models they tended to keep the number of pushbuttons to a minimum, I doubt whether they ever built a set with a motor driven dial. I have a high end Sparton model from 1941, it has ten tubes, but for whatever reason they only added a pushbutton bank of six pushbuttons which is something that a lower end Philco model would have had, even on the Canadian market.
Regards
Arran
Posts: 2,570
Threads: 336
Joined: Jun 2013
City: lawrenceville nj
gee arran
you could be a little nicer not come out and say how bad it looks to you
he seen it, bought it .just say it looks nice or nothing
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 1,455
Threads: 96
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Yes I double that! Nice find my friend.
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
Sometimes all we need to know we learned in Kindergarten, like "if you don't have something nice to say about someone (or their radios), don't say anything at all"
Greg, that is an absolutely beautiful dial ![Icon_thumbup Icon_thumbup](https://philcoradio.com/phorum/images/smilies/icon_thumbup.gif) . The station/frequency scroll is kind of unique too. I tried to find a better picture of it, but this is the best I could do:
[Image: http://www.antiqueradios.com/forums/down...p?id=47231]
Photo from beej8508 in Spokane, WA (http://www.antiqueradios.com/forums/view...2&t=222629)
If you want to recreate that frequency dial, collector Steve Geary in the Dayton, OH area might be able to furnish some pictures for you. Shoot me a PM if you need his contact info.
I restored a Sparton with a similar dial for a local fellow who ran a frame (picture/print) shop. He was from England and I thought it was cool that he would listen to the BBC news during dinner on that radio.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
(This post was last modified: 04-01-2015, 08:16 AM by Eliot Ness.
Edit Reason: added photo link
)
Posts: 669
Threads: 145
Joined: Jun 2011
City: Elko,MN.
Some people can always find something negative to say about someone elses treasures.
I think you found a real beauty there. Congrats.
murf
Posts: 1,521
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
No need to call Arran out. He is entitled to his opinion just as I am entitled to mine. If the two opinions happen to disagree with one another, I accept that and trust he would do the same. I'm happy with the radio, and that's what matters most.
Many thanks, John KK4ZLF, for the photo of the frequency scale. I will send you a PM for Steve's e-mail address.
Greg V.
West Bend, WI
Member WARCI.org
Posts: 1,521
Threads: 240
Joined: Sep 2012
City: West Bend, Wisconsin
Here's a photo of a Sparton 987 with the original finish:
Greg V.
West Bend, WI
Member WARCI.org
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
Who's Online
|
There are currently 3757 online users. [Complete List] » 1 Member(s) | 3756 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|