Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco knob colors
#1

While restoring a couple of mid to late '30s Philcos,I noticed that some of the knobs on these sets are black while others are brownish/mahogany.What is correct color knob for the years '35 thru '38?
73 de Bill W4NJF
#2

Generally black from what I know & own. The brown ones were used on later 40 and up sets. Again, I'm not 100% sure of that.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#3

From what I have seen which is limited to 1936 and 1937 models, 1936 models have black knobs and 1937 models are brown knobs. The limited number of pre 1936 models I have seen have black knobs. The 1938 models I have seen had brown knobs. After 1938 I have no clue.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#4

Are we talking a very dark brown? Almost indistinguishable between black? I've noticed this on 37/38 sets.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#5

Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill
#6

Bill Fulling Wrote:Ah So! I think I'm getting a consensus of opinion here,and it looks like "36 and earlier knobs are black and '37 and later knobs are brown.
Am i reading this correctly?
73 de bill

That's the way I see it. We need to hear from Ron or chuck to know for sure.

Bill

It's not what you don't know that hurts you it's what you know that's not so.
#7

Again, are there a lighter brown, or a very dark brown? Later ones from the 40s(possibly 39) are a lighter brown depending.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#8

1935 season - Hex or "acorn" style on most Philco models, except for Model 16, late version 144, and 97 with concentric tuning knobs; these used knobs with a sort of octagonal shape. I've seen these in black, and very dark brown.

1936 season - New knobs except for the cheaper models; all black.

1937 through 1940 seasons - Same style round knobs as most 1936 models, except they are brown instead of black. The band switch knobs on 1937 and 1938 models are VERY different from the bar knob used on some 1936 models only.

1941 season - A new knob made of Tenite, smaller than previous (1937-40) knobs.

--
Ron Ramirez
Ferdinand IN
#9

Thanks Ron! I wasn't sure about this but it had me scratching my head-why would Philco use knobs where the colors were noticeablly different on the same set.
73 de Bill




Users browsing this thread:
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>