Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Color for 37-650px ?
#1

Hello Ron or anybody, cant seem to find any pictures of the 37-650px . Is it that scarce of a set that there are no good photos out there? I am getting mentally ready to tare into the 650px soon. I kind of know what it should look like buy the factory finish that's on it but has deteriorated quite a bit over the years like me. Icon_eek I will do it justice, V pattern chevron cloth will be put in there, the same as the 16b cabinets I think? The veneer seems to be mahogany and one side is jacked up and will need to be replaced Icon_sad I have a vision for this radio on the toning and will do some eye POPING Icon_eek Icon_eek Icon_eek toning that will give the wood a living eye catching appearance that will be un surpassed by philco employees working in the cabinet dept. There going to say why didnt we think of this sooner, Fred should be running this department and we would be selling more radios than zenith or our competitors Icon_shh


Attached Files Image(s)
       




Users browsing this thread:
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2734 online users. [Complete List]
» 3 Member(s) | 2731 Guest(s)
AvatarAvatarAvatar

>