Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 39B Front & Arch Veneer?
#1

Hi Group:

I am repairing a 1935 Philco model 39B battery set with cathedral cabinet. The poor girl is in awful shape and the front panel and arch have nearly completely de-laminated. I am slowly clamping and re-gluing.  I am missing some of the veneer on the front and nearly all of it on the arch and can use some advice on the veneer types on the front and arch. The front looks like book matched walnut? I am not so sure of the veneer on the arch - a toned white wood?  From the pieces that remain it looks like a darker wood with grain. What was commonly used on '35 model (introduced June '34) cathedral arches? Included are photos of the veneer on the front - one picture showing the obverse of the veneer (with the Philco logo) and one with the reverse of the veneer showing.  Thanks for any help! -- Andy 


Attached Files Image(s)
       

Andy Sorrell
Palmyra, Virginia
#2

Hi Andy,

The 1935 (June 1934) Philco sales catalog lists the following for the 89B (same cabinet as 39B):

   

You can find the scanned catalog here:

http://philcoradio.com/phorum/showthread.php?tid=15241

Sorry there's not more to go on. Hopefully someone else can add to it.
#3

Thanks Nathan! That is very helpful. -- Andy

Andy Sorrell
Palmyra, Virginia




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>