Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

H-940 model ???
#1

Hello Philco Friends !  How are you

This huge console is proposed on a french site , fitted with a radio set " Philco " , which seems to be a h-940 one

Do you know this model ?

Do you think the console is a Philco one , or a french made one , ?

Here after some photos the vendor sent to me

Thanks for your answer Icon_biggrin


Attached Files Image(s)
               
#2

This is a midcentury modern. Maybe someone here is into that.

Pas ma tasse de the. Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

As the resident mid century modern guy (who lives in the 1960 mid century ranch house) Icon_smile ...

That is not Mid Century Modern.

It looks more like the "Mediterranean" console style that was popular from the late 1960s into the 1970s, before stereo components began to take the place of those yuuuge floor model console stereos.

As for the model number, ordinarily the H in H-940 would indicate 1960 model year. But this stereo is much newer than 1960. It's clearly solid state and uses the Philco-Ford logo. I don't believe the Philco-Ford logo came into being until at least the mid-1960s, even though Ford bought Philco out in 1961.

If it was intended for the UK and European market (including France), then the model number may not mean anything (from a USA Philco perspective, that is).

--
Ron Ramirez
Ferdinand IN
#4

Hello Sirs

Thanks a lot for explanations .

Yes indeed , it's a huge console and I do'nt intend to buy it !!!
I just want to inform the vendor , if possible !

here is the associated turntable .


Attached Files Image(s)
   
#5

My father used to own one of those, it's from around 1972 if I remember correctly, the cabinet was called "Spanish". There were some differences though, such as the record changer was black, not silver and chrome, the woofer speakers were 12 inch round, pincushion framed, rocker switches rather then slide switches, and the unit was branded as a "Silvertone" since it was sold by Sears, apparently made in Canada as well.
Regards
Arran
#6

Thanks a lot Arran , for your witness and your explanations !

regards




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM
Philco Model 80 Transformer resistance
I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM
Rusty Tuning Condenser
I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM
38-10T chassis Restoration begins
Hello Dconant , they sold mica to use as a insulator between transistors and their heatsinks too. Rob I will remove th...radiorich — 02:52 PM
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM

[-]
Who's Online
There are currently no members online.

>