Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Acmefone from 1922
#1

Latest project:

https://www.russoldradios.com/blog/acmefone-from-1922

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#2

It is wonderful.
 I am not into those old sets but I have been starting to like them recently..
Ugh, Another thing to want, Icon_lol


Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Very nice Russ, like Kirk those older sets are starting to interest me...

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

Yep. Radios prior to 1924 and all of the battery supers (less RCA) are the ones most radio collectors are looking for   - - - Icon_wtf  - - Don't tell anybody!!

The original tubes are hard to find and may cost more than the radio.

To illustrate this - I just finished (yesterday) a Radiola III and a Balanced Amp. Both are being used as displays for the WD-11s and tipped WD-11s which are worth more than the radios. - - - I suppose that I could just make a stand for the tubes.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

Amazing stuff - I'm fascinated by early radio apparatus, and how the technology changed in the prewar period as it became more common to own a receiver.

I don't hold with furniture that talks.




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4294 online users. [Complete List]
» 1 Member(s) | 4293 Guest(s)
Avatar

>