Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Correct grill cloth for 16B cathedral
#1

What is the correct grill cloth for a 16B cathedral (5 band)? I've seen pictures with a white plain cloth (on mine now) and others with a brownish "chevron" pattern.

Thx
#2

If you are talking about the cathedral, shown here:

http://www.philcoradio.com/gallery/1933b.htm#c

then you want the 70/90 pattern, which is pattern #1 from Radio Grille Cloth Headquarters:

http://www.grillecloth.com/

--
Ron Ramirez
Ferdinand IN
#3

Yes that's my radio and it currently doesn't have the correct grill cloth.

Ron, thanks for the info.
#4

Another question regarding the 16B cathedral:

What was the original veneer species used on the case, Walnut or African Mahogany?

Thx
#5

Walnut . Thats a good looking set .




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 4052 online users. [Complete List]
» 2 Member(s) | 4050 Guest(s)
AvatarAvatar

>