Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 52-548 grille cloth
#1

Does anyone know if this model came from the factory with installed grille cloth? Mine has none and do not see any evidence that there was any grille cloth in it. I have the maroon model. Looking at the internet pictures that are available, it looks like some may have and some didn't. Thanks, Ken
#2

hello Ken,

I found a photo of your radio on the radio Attic Site and if you look close you can see the speaker cone .

Sincerely Rich
P.S. here is a photo!


Attached Files Image(s)
   
#3

I have one of those with a Brown Bakelite cabinet and it does have grille cloth.
#4

Thanks for taking the time for your replies. Reckon it is still a guessing game for mine until I can find out more info.Just finished putting it back together after servicing it but will pull the chassis again and have a more detailed look at it again. Can't see enough detail in the radio daze one like most pics on the internet. Sooner or later I will get this figured out.
#5

Sometime with sets like this there is a gauze type very thin netting of sorts, probably to keep things from sliding in.

Paul

Tubetalk1
#6

Hello Paul,
I agree and what reminds me of is that black fabric that is found under bottoms of couches .
Rich
#7

I think your gauze idea may be correct. I have seen that type of material in other 50s radios. Usually on some sort of cardboard frame that lays between the speaker and the grill bars. What clued me to possible missing cloth was that the speaker cone seemed to be cleaner than normal with very little dust on it. Thanks for jogging my memory.
#8

Under Couches, yes, good description.

Paul

Tubetalk1
#9

Hello Ken,
glad to help .
sincerely Rich




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM

[-]
Who's Online
There are currently 5995 online users. [Complete List]
» 1 Member(s) | 5994 Guest(s)
Avatar

>