Philco 650X Phinally Phinished
Posts: 1,119
Threads: 44
Joined: Feb 2015
City: Roseville, MN
I have owned this console since my grandmother passed away in 1964. I knew it wasn't working so it got put in the basement for a while then at some point I removed the chassis and was overwhelmed. Chassis went into a box and the cabinet stayed in the basement, both for future consideration. I got around to looking at restoration when we moved and rediscovered the chassis. That's when I discovered the Phorum and all the resources it has.
To my dismay, there was 3 open transformer primaries, RF, Audio and OPT. The speaker cone was trash. So I knew this would be a long haul. In addition, the cabinet veneer was peeling away at the seams on the front curve and some of the vertical columns were damaged.
In the summer of 2017 I spent almost 3 months stripping and reconstructing the cabinet and one other console radio cabinet. Then started off and on with the chassis. After salvaging parts from two other chassis and rewiring I had a working radio. I just finished putting on the finishing touches and it sounds very nice and is very sensitive.
For anyone interested, I will be posting some of the left-over 650 parts for sale.
Posts: 16,476
Threads: 573
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
This is a beautiful radio. Plus a family heirloom.
Great job, Rod.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,135
Threads: 158
Joined: Jan 2013
City: Westland, MI
Great job, Rod! Grandma is smiling. Take care and BE HEALTHY! Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 1,836
Threads: 117
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Rod,
Wow, that looks great !
Sincerely Richard
Posts: 5,162
Threads: 273
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Very nice! 
Posts: 4,429
Threads: 418
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Super deluxe.....Paul
Tubetalk1
Posts: 114
Threads: 26
Joined: Jul 2022
City: Monticello
State, Province, Country: Illinois
Looks Great! Nice Job....
Philco's: 86 Low Boy, 90 High Boy, 95 High Boy, 76 High Boy, 112X Console, 118X Console, 41-265 Console, 41-608P Console, 52GC, 370 LZ, 512, 20 Baby Grand, 70 Baby Grand, 71B, 52B, 118B, 60B, 84B, 610B, 37-89B, 38-10T, 38-35B, 41-221CI, 42-321T, 46-1203
48-214, 48-206, 49-506
Posts: 21
Threads: 2
Joined: Dec 2021
City: Grafton
State, Province, Country: ON
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Need to purchase some accessories for restoration of my Old Philco Radio
|
| Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM |
|
First Radio restoration
|
| Hi Tubeman,
Welcome to the Philco Phorum. Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM |
|
First Radio restoration
|
| You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM |
|
Zenith H725
|
| Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately.
More ...EdHolland — 10:18 AM |
|
Graphics for majestic 1050 dial glass.
|
| Murf;
I found this thread on the ARF, the first photo has a pretty good view of the dial glass.
Regards
ArranArran — 01:12 AM |
|
Zenith H725
|
| hello Ed,
how about that speacial tape used for ducting it's like foil or how about thin piece of
aluminum roof flash...radiorich — 12:19 AM |
|
Zenith H725
|
| Ed;
One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM |
|
Zenith H725
|
| I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM |
|
Zenith H725
|
| The PSU filter cap arrived today (thank you USPS!) so I will work on that later.
Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM |
|
Philco 610B oscillator wiring
|
| Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM |
|
Who's Online
|
There are currently 2349 online users. [Complete List]
» 1 Member(s) | 2348 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
