Another new acquisition - a Philco Grandfather Clock!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Recently, I made a deal to acquire a Philco grandfather clock cabinet.
Advertised as a Model 70, the reason I acquired it is because it is not a Model 570, but instead, it is the very rare Model 52 grandfather clock.
The gift supreme for Christmas - a PHILCO.
[Image: http://www.philcoradio.com/images/phorum/52_gfc/gfc.jpg]
How do I know it is a 52 and not a 570? Look at the close-up of the front panel:
[Image: http://www.philcoradio.com/images/phorum...loseup.jpg]
Notice that it has three shaft holes, not four, and that they are spaced farther apart than Model 70 shaft holes would be. In fact, this is the proper spacing for a 52 chassis. In addition, the escutcheon is the correct one for a 52. Too bad someone replaced the original escutcheon pins with screws! But this, too, is repairable.
More info here:
http://philcoradio.com/gallery2/1932b/#M...ther_Clock
At this time, it appears this is only one of two 52 GFC models known to exist. I have seen one other, a complete set in a private collection. I have never heard of anyone else owning a Model 52 GFC. If anyone else does, I would like to know about it.
--
Ron Ramirez
Ferdinand IN
Posts: 2,031
Threads: 367
Joined: Jun 2010
City: Dover, OH
Great find! ![Icon_biggrin Icon_biggrin](https://philcoradio.com/phorum/images/smilies/icon_biggrin.gif) Now you are part of the club of those of us who have Philco Grandfather clocks! My mom and I went half and half on a 570 a couple years ago. Pretty much complete except it has a later PM magnet speaker installed in place of the original. Though I think I found a speaker for it a while back.
No matter where you go, there you are.
Posts: 25
Threads: 6
Joined: Nov 2010
Awesome score! I know your proud!
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Great find. I'd love to have one of these. Looks great "under" the tree too!
Steve Chambers
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Mine has a 5 inch P-2 speaker which Philco used in the 52B cathedral and 52C table model. I was surprised they did not use the 8 inch S or S-2 that was used in the 52 lowboy.
--
Ron Ramirez
Ferdinand IN
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
WOW! I too have not heard of another Philco 52 in a grandfather clock cabinet. Recently I saw where the 51/52 chassis was also found in the 70 style cabinet, another suprise of similar nature.
Hope that this and other radios like it make it into another edition of your book, Ron... hint, hint....??
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
I think a new main topic might be in order, oddities or one-off's or maybe Philco Phrankensteins
Happily back in Illinois..not.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Second that idea, Ron.... I bet there are plenty of "oddities" out there, be they factory or otherwise. I think battery powered radios with old, or even newer x battery eliminators built in would be included under this topic. Maybe even (ahem) people who marry 116X chassis/speakers to 116b tombstone cabinets could submit their entries.................
ANOTHER SUBJECT: wonder if your grandfather clock actually takes a model 51 chassis, which is really the same as a 52 except for the number. The reason I say this is that it would logically follow the 551 mantle radio model.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
There is an existing thread on Frankenradios here on the Phorum:
http://philcoradio.com/phorum/showthread.php?tid=709
My 52 GFC is not a Franken-Philco. I have seen another complete 52 grandfather clock a few years ago, long before I knew the one I now own existed. And my friend's 52 GFC did have a 52 chassis, not a 51. It makes sense when you stop to think how Philco sometimes combined chassis and cabinets in the 1932-33-34 period to make some low production oddballs.
The 80 Colonial Clock is an example. Originally a 551, two strips of wood were added to the front panels to hide the shaft holes for the 51 chassis. A wooden platform was made to go inside to hold up the 80 chassis at the proper height. Two new shaft holes were drilled in the front panel for the 80 control shafts. I can look inside my 80 Colonial Clock cabinet and see the original shaft holes for a 51 chassis.
You guys are free to start a new thread on unusual Philcos, or perhaps I will tomorrow if neither of you do so before then.
TA Forbes Wrote:Hope that this and other radios like it make it into another edition of your book, Ron... hint, hint....??
It will happen. But please be patient. I expect some good things to happen in the next year or two towards that goal.
--
Ron Ramirez
Ferdinand IN
Posts: 25
Threads: 10
Joined: May 2010
I have a 1931 Majestic Sherwood grandfather clock radio. The clock works, the cabinet is in great shape, but the radio is missing, darn it! I guess there was a fad for grandfather clock radios in '31? Marc.
Posts: 271
Threads: 12
Joined: Nov 2005
City: Nashville, TN
Great find Ron.
I have worked on 3 GF clock radios but not a Philco yet. One of these days I may find one, even if it isn't a rare one like yours. Beautiful set.
Take care, Gary.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
An attempt to remove the Field Coil from a G speaker
|
Hi Morzh,
May be a good idea to remove the cone to prevent damage. You may have to do so anyway to remove the pole ...MrFixr55 — 08:44 PM |
Philco 91 Restore Code ??
|
I think that Danaher, the company that owns Beckman-Coulter (the company that I worked for 41 years) owns Fluke. They a...MrFixr55 — 08:35 PM |
Philco 91 Restore Code ??
|
Rod
I wish... :lol:
I am not sure I'd buy the Fluke, had it not fell in my lap for free. $500 to $800...it's a lot...morzh — 08:09 PM |
Philco 91 Restore Code ??
|
Mike, ...you get a commission?RodB — 07:52 PM |
New member
|
Hi. I specialize in refurbishing Predictas, but I'm in Chicago. If you can get it to me, I'd be happy to go over it. ...Bob Andersen — 06:43 PM |
An attempt to remove the Field Coil from a G speaker
|
I have 3 G speaker, all with open Field coils.
Today I pull one of the shelf and decided to try to remove the FC (spo...morzh — 06:07 PM |
Philco 91 Restore Code ??
|
Thanks Mike. I will check them out.dconant — 05:52 PM |
Philco 91 Restore Code ??
|
There is no such thing as bad Fluke.
This said, they are expensive. A Fluke is easily 10x the price of comparable CCC...morzh — 05:45 PM |
Philco 91 Restore Code ??
|
Hello Mike,
Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87.
My third is Fluke clamp -...radiorich — 05:04 PM |
Philco 91 Restore Code ??
|
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
Who's Online
|
There are currently 3341 online users. [Complete List] » 3 Member(s) | 3338 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|