Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

IDENTIFICATION PT50 or TH14 ??
#1

Hi, I am new on this forum!
Found recently this one, very poor condition.
Probably PHILCO PT50 Transitone (1940) or may be TH14.(seems same line up)
If PT 50, rear coil waxed for "tropicalisation" ? and why these turns in both directions
perpendicular ?
Someone could give precisions please ?

And for building new cabinet, I am looking for a good photo of the box.

Thanks for help.
megawave
French collector

[Image: http://img638.imageshack.us/img638/9291/...50face.jpg]

[Image: http://img339.imageshack.us/img339/702/philcodessus.jpg]

[Image: http://img836.imageshack.us/img836/1585/...bottom.jpg]

[Image: http://img407.imageshack.us/img407/1162/...tcopie.jpg]
#2

Looking at the service bulletins for both 1940 models, the schematics are the same (except for one additional cap in the TH-14. The other components have slightly different values as well, but schematic is virtually identical.
Tube complements are also the same.
The big differences are dial plates, and wood (TH-14) or bakelite (PT-50) cabinets.

So, it appears you have a chassis out of a TH-14 or TH-16, due to he dial face.

Chuck
#3

Hi Chuck, thank you for infos; I have a picture of PT50, (found on Ron's site, see below) but it is WOOD cabinet. Do you know what was the look of bakelite cabinet for this one ?
Thanks
megawave
Icon_smile
French collector


[Image: http://img703.imageshack.us/img703/3645/...50wood.jpg]

Uploaded with ImageShack.us
#4

No I don't a picture. I believe it is similar to the PT-47/PT-51, but with out the pushbuttons.

Ron can correct me here if I'm wrong.

Chuck
#5

OK Chuck, thanks for reply, all is clear now. (Seen also your reply on Antique radio forum.)
Photos on line when job finished. Icon_smile
Sincerely,
megawave
French collector
#6

Hello Megawave,

Just so happens I have a PT-50 cabinet. Icon_smile If you need detailed photographs and dimensions, please contact me.

I agree with Chuck that you have a TH-14 or TH-16 chassis, due to the design of the dial face.

Just for fun, here's what they look like.

TH14: http://www.philcoradio.com/gallery/1939c.htm#m

TH16: http://www.philcoradio.com/gallery/1940a.htm#bn

I find it interesting that the TH-14 was advertised as a (January) 1939 model, yet it is not in the 1939 Philco RMS Yearbook - it is in the 1940 RMS Yearbook. Icon_confused: Icon_confused

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
I'm starting to restore a Philco 16X, I need spare parts. Help me find it
Hello Peter, What great project I am looking forward to see your progress with this console !! Sincerely Richardradiorich — 10:20 PM
Philco 42-345 Restoration/Repair
Ok guys, JustRadios has me worried after reading an article about purchasing resistors and I hope that I haven't made a ...osanders0311 — 08:59 PM
Philco 46-1209 strange behavior
Yeah, I have no idea what's going on there. I will re-check it in the morning, and also trace out the B+...sq65 — 07:55 PM
I'm starting to restore a Philco 16X, I need spare parts. Help me find it
Peter; The Philco (3)16X was likely a Canadian market Philco, which means that Philco Products of Canada LTD likely h...Arran — 07:45 PM
Philco 46-1209 strange behavior
It is kinda impossible for the plate to have 120V with the tube in and have it not with the tube out, short of the tube ...morzh — 07:42 PM
Philco 42-345 Restoration/Repair
In case anyone else run into the issue I had figuring out Richey caps I received a response from just radios, and the ne...osanders0311 — 05:07 PM
Philco 46-1209 strange behavior
About all I've done is unplugged them to take the chassis to my workbench. Anything I should check with them?sq65 — 04:13 PM
Philco 46-1209 strange behavior
Have you touched the speaker wires, either speaker plug or the socket?morzh — 03:47 PM
Jonnym
Thanks everyone, I will pull the chassis out of the cabinet and do some checking.    The volume adjustment is not “scra...Jonnym — 02:01 PM
Model 96 volume control
Welcome to the Phorum! :wave: ...and in addition to the annotated schematic that Mike linked to there is the fact...klondike98 — 01:27 PM

[-]
Who's Online
There are currently 1170 online users. [Complete List]
» 1 Member(s) | 1169 Guest(s)
Avatar

>