Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Know model number now another question
#16

Good idea codefox although she appears to be older than me I'm going to bet she outlives me! She helped load the 111 in the back seat of the Camry and I swear she carried the majority of the weight. She indicated she plans to pass it on to her grand daugher when the time comes. I can't see either of my grand sons taking a liking to any AM radio.
I just got back from a 400 mile round trip with the necessary stops at three sewing and fabric stores along the way. In the back seat is my new replacement for the space I made for the 111. A nice Philco 90 lowboy! I'm worn out, may go to bed early.
Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#17

I know this is a major topic shift, but try this when going on long trips:

Bring a small cooler and have several apples chilling in it. Make them your favorite variety. Chilled apples are refreshing AND they perk you up like a cup of coffee!!

I also have oranges in my cooler when I travel.
#18

Aye. and let it be so.




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4260 online users. [Complete List]
» 1 Member(s) | 4259 Guest(s)
Avatar

>