Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

640 and 650 band indicator masks
#1

Do the 4-band 640 and 650 Philcos have a dial mask that moves behind the dial to show which band it is on? It doesn't seem to be present in two 650's and one 640 in my collection; oddly enough, the 3-band 645 DOES have this mask, changing the brilliance of the indicating "Y".

I just bought a junker 650 with the idea of transplanting this mask- but the junker doesn't have one either. At least I now have a cabinet for the 640 chassis that's been collecting dust.

Pete AI2V
#2

Just went downstairs and checked my 650B plus a 650RX chassis I have in the archives; neither have the shadow mask.

Apparently this idea was not fully implemented throughout most of the Philco lineup until mid-season 1936. Models 116 and 660 had shadow masks in the first half of the season, while Models 650, 643, 640, 630, 623, 620, 611 & 610 did not.

--
Ron Ramirez
Ferdinand IN
#3

Thanks, Ron.

I won't be looking for something that doesn't exist any more.

Pete AI2V




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently 3967 online users. [Complete List]
» 1 Member(s) | 3966 Guest(s)
Avatar

>