Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New Grille Cloth Available
#16

Yeah, I was down at Kenny's last spring and the supplier messed up and he got stuck with a whole batch that was too dark. He had just developed a process where he can lighten it up and it looks pretty good. That block pattern was the most difficult to get the correct weave.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#17

Just received two pieces of Kenny's new cloth- both are outstanding.
Got a console piece of the Whiskey Rayon for a Zenith 10S567- perfect match for original
Got a piece of the small diamond pattern for a Philco 60B- very near perfect match.
High quality stuff.
#18

Icon_clapIcon_thumbupIcon_thumbup
#19

I have all of Kenny's new GC's and they are outstanding in quality and color.
#20

I just received (2 days ago) the diamond reversible pattern in the 25 x 25 to do a old Edison phonograph for a friend. It looks fantastic and the service was great. Don't hesitate. I will order from Kenny again. The owner & his wife just love it. The cloth was very close to the original piece that was still hanging on the Edison.
#21

I got some replacement griil cloth for my 40-190 console from and Etsy site: http://www.etsy.com/shop/SpeakerFabricSu...eader-name
It was not an exact match to my cat scratched and torn original, but it was close.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 3640 online users. [Complete List]
» 1 Member(s) | 3639 Guest(s)
Avatar

>