Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Is this a Philco 71?
#1

HI all,
I have a Philco 71H highboy, and the chassis in it is unmarked but in doing some re-capping I found inconsistancies with the Philco 71 schematics... I have a 71 code 125 cathedral and thats very different from this chassis.

The chassis has a lineup of 36's with a 44IF but this chassis is also fitted for a Tube shield, which is missing... were any 71's fitted for a tube shield? were any sets with a 36 or 44 tube lineup fitted for a tube shield?

Just not sure which model this chassis is really for.

Thanks

KEith
#2

Hi Keith

The majority of Philco 71 chassis (Code 121/221 and 123/223) have a single large tube shield on the left (when looking at the chassis from the back), like the late version of the Philco 70.

Towards the end of 71 production, Philco switched to individual cylindrical shields over the RF, Det-Osc and IF tubes.

Shadow meters were also added to Philco 71 sets sometime during production. I'm pretty sure that no code 121 or 221 model 71 sets had shadowmeters. I'm thinking these were added during production of code 123/223; and by code 125, a shadowmeter was standard.

--
Ron Ramirez
Ferdinand IN
#3

aha, Ok, this is a code 221 as I suspected, no shadowmeter. It might have the wrong tubes in it, it works well without the tube shield but Id like to find one. Ive had this set over 20 years now and im going thru it to make sure everything is right now that I have things like schematics that I didnt have 20 years ago!

Thanks.,

Keith
#4

Keep an eye on eBay those shields show up from time to time. There was someone making them but I haven't been able to find out who it was or where he was selling them.

-Keith
#5

Chuck Paci, cpaci1 at verizon dot net, makes the reproduction tube shields, and they are of excellent quality and include reproduction stickers on them. He puts them on eBay from time to time, and Mark Oppat resells Chuck's shields, but you can contact Chuck direct and he will be glad to sell one (or more) to you. Icon_smile

All 71 sets have the following tube lineup:

39/44 - RF amp
36 - Det-Osc
39/44 - IF amp
37 (connected as a diode) - 2nd Det.
39/44 - Audio Amp
42 - Audio Out
80 - Rectifier

--
Ron Ramirez
Ferdinand IN
#6

Mark had a few of the shields up at Kutztown.
Terry




Users browsing this thread:
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently no members online.

>