Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

A few Craigslist finds
#1

Hi everyone. While now in the fourth week of waiting for some period appropriate cloth wire for my 89, I've gotten impatient and cleaned out my local Craigslist of cheap project radios. Icon_biggrin


Here's the real beauty, a 38-7 code 121 in nearly perfect condition. All the cabinet needs is a little black touch-up around the grille, even the cloth is perfect. I don't know anything about it, other than the owner said it worked a few years ago. The expensive components are probably all good. This cone-centric dial is intriguing.

[Image: https://lh5.googleusercontent.com/-FSgZP...C_7965.JPG]


The dial has flame thrower stations from all over the country, like WLW, WSM, KDKA etc. WIS 560 is local and still broadcasting, so it's always been in SC.
[Image: https://lh3.googleusercontent.com/-SiXBW...C_7966.JPG]

[Image: https://lh5.googleusercontent.com/-4eDl8...C_7967.JPG]

[Image: https://lh6.googleusercontent.com/-IoNGm...C_7968.JPG]


Here are the rest. Real junkers, but good practice and hopefully worth a few dollars on ebay once restored. Bendix 753M, Emerson 541, Emerson 659B. Yes, the Bendix has a dial face hand drawn onto a piece of plexiglass. The original glass was fairly fragile apparently.

[Image: https://lh5.googleusercontent.com/-kmMr_...C_7969.JPG]


I've also built a low power 'Police' band transmitter in the basement to service the old Philcos. 1.8Mhz is very quiet. I'm really starting to get into this hobby Icon_smile

The older folks I've bought these from get quite a kick out of an 18 year old interested in 70 year old electronics Icon_biggrin
#2

I cleaned out my craigslist a few weeks ago,lol

Some new stuff but they want way too much money. Now its just a waiting game!

Nice pieces though. projects are fun fun fun... Icon_thumbup

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

Unfortunately my parents will only tolerate so many receivers sitting on the dining room furniture, and my room is beyond full of my projects, and the garage with dad's. There are a couple more radios there I really want to get, but just have no space for.

I envy you guys with entire rooms or even basements devoted to the cause. My 'workbench' is a small patch of carpet in the corner of my room. Life goes on Icon_biggrin


Will
#4

Love the 38-7. I had a chairside and it sounded great
#5

18 is pretty young to get the disease but when you get out on your own you can work on your P.H.D. (Pile higher and deeper)
#6

Icon_lolIcon_lolIcon_lol
#7

The Emerson AM/FM will look neat and sound pretty good when cleaned and restored!

Paul

Tubetalk1
#8

Antique radios are a lot healthier than what I was into when I was 18. Icon_e_wink Icon_silent


...I mean before Boot Camp anyway...

It's not how bad you mess up, it's how well you can recover.
#9

I underwent the same cure. Amazing what they can do.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok AC51 tube tester
Note that no power cord, power switch, or power transformer switch are shown. That (along with my experience with full s...DaleHCook — 07:09 AM
IF can wire size and Rubber mounts?
A pair of wire strippers can give you an idea of what the existing gauge of the wire leads are in the IF can, I think it...Arran — 06:07 AM
My last cabinet for this year
Hello Dan, That is really beautiful what great looking radio you have ! I have friends who live in Calgary and the wea...radiorich — 01:51 AM
Philco Predicta Siesta picture over time getting dimmer
I found that the wire insulation was burnt.  The fly back needs corona dope! Why would someone put that there?Platinumblonde36 — 01:09 AM
Philco Predicta Siesta picture over time getting dimmer
This is what it looked like beforePlatinumblonde36 — 01:01 AM
Philco Predicta Siesta picture over time getting dimmer
Platinumblonde36 — 12:58 AM
Philco Predicta Siesta picture over time getting dimmer
Platinumblonde36 — 12:57 AM
Philco Predicta Siesta picture over time getting dimmer
I'm finding some strange things in my set and for the most part it's also original, so I need to start going over everyt...Platinumblonde36 — 12:55 AM
12' Philco
Not anymore Mike. Andre The Giant Born: May 19, 1946, Coulommiers, France Died: Jan 28, 1993 (46 years), Paris, Fran...RodB — 11:53 PM
IF can wire size and Rubber mounts?
Renovated Radios do carry what you need. As for the voltage, a wire should be at least 300V-rated.morzh — 11:13 PM

[-]
Who's Online
There are currently no members online.

>