Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 60 first version
#1

I finally found a decent first version 60. I know its a common set but I have been looking for years for one worth restoring and have only seen one at the local swap meets/auctions. It will complete my model 60 collection excluding the different escutcheon/grill cloth styles of the 3rd version (mine is the last style with the large escutcheon) now I only need a first version 89 flat face and a late model 37-84b to complete my 89/84 collections.
   
#2

Front looks pretty good, how's the top and sides? it's going to look very sharp when you've finished.
#3

Back is as good as the front. If it wasnt for a couple deep scratches I would leave the original finish alone.
#4

Looks pretty nice but I don't think the grill cloth is salvageable, Icon_lol

Scratches can be touched up since the finish looks good in the picture.
Maybe a little GOJO as some people love to recommend.

Gonna make a fine addition to the collection.

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

If you look under the top right speaker bolt, there is a 3" long scratch through the finish which shows more so in person than in the picture. If it wasnt for that and a few others I would probably leave it alone. Plus, someone re glued a piece of veneer in the grill and didnt do a very good job, looks like crazy glue.
#6

What is it with model 60's and having the grill cloth and speaker cones torn out of them? Were these things magnets for bratty little kids? My 60L was like that and I've seen other Philco radios with damage like that over the years. I'd still like to add a model 60 cathedral to my stable in the future. Icon_smile

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 80 Antenna Issue?
You are kind of on the right path. You can touch the grid cap of the Detector/Oscillator 36 tube. I'm expecting a respon...RodB — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum, PittsburghToast!  I found an old thread that my interest you regarding the quality and worth of P...GarySP — 08:48 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Welcome to the Phorum! :wave: We do not have anything on that unit in our digital library. There is a Sam's Photof...klondike98 — 08:47 PM
Model 80 Antenna Issue?
I’ve replaced all the caps and resistors and the radio is working but minimal volume unless I put my hand near the re...Hamilton — 08:24 PM
Looking for any info: 1977 Ford-Philco Console Hi-Fi Turntable and Radio
Hi there! this is my first time posting. I recently picked up this Ford-Philco Console record player and radio at a yard...PittsburghToast — 07:28 PM
philco predicta
I found that where I have the 140v B+ there is 50v and the tuner receives 235v through the orange cablecgl18 — 04:14 PM
Philco 91 code 221
Chassis grounds thru rivets is another good place to look. Oh and the stator screws on the tuning cap where the leads at...Radioroslyn — 08:11 AM
Philco 91 code 221
Dirty tube pins and socket, cold solder joint, stray tiny strand of wire, clean the entire area around the oscillator tu...RodB — 08:43 PM
Philco 91 code 221
I have been restoring one of these sets and switched it on yesterday. It didn't exactly spring into life, but after a co...Philconut — 08:26 PM
Philco 50-925 antenna connections
That's super. Glad to hear you figured it out. Paul.Paul Philco322 — 11:11 AM

[-]
Who's Online
There are currently 1329 online users. [Complete List]
» 3 Member(s) | 1326 Guest(s)
AvatarAvatarAvatar

>