Restoring my 37-116. It plays now!
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Yeah I was about to ask you about that quick cleaning thing, forgot what it was called but you beat me to it - thanks, so it is GoJo.
Where is it sold?
As for the handles, I did clean them with WIndex some, they do look better; the white sheet you see is mostly reflection but yes, there is some dirt left there in the knurling.
the sound is AWESOME!!!!!
(This post was last modified: 09-07-2013, 03:24 PM by morzh.)
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I know PEP boys has it. Never clean Bakelite with ammonia it will damage the surface of the Bakelite. If used enough it will remove the shine and leave it streaky. Don't ask me how I know
Terry
(This post was last modified: 09-07-2013, 03:48 PM by Radioroslyn.)
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
I have Pep Boys close by.
So, 1) do I apply it with 0000 steelwool or just cloth?
2) Do I also need Briwax with it?
(This post was last modified: 09-07-2013, 04:04 PM by morzh.)
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I would just use a rag for starters. On your set the finish still looks pretty good. If it was worst shape with lots of sm cracks in the lacquer I wouldn't use the steel wool. In that case the steel wool would tend to chip away at the finish. Next time you see some 4/0 pick it up and give it a try!
I don't know if you can get Briwax over here as I think it's made in the UK. Best I remember it's pigmented wax. I think I would give Howards a try.
Terry[/font]
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Which actual Howards product?
Like Feed'n'Wax?
(This post was last modified: 09-07-2013, 04:52 PM by morzh.)
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Nah I think it's weed and feed. I don't remember.
Terry
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Off to the PepBoys - they are 4 miles away, sell unsanded GoJo.
WIll try it tonight or tomorrow morning.
I hope it does not stink.....need to try it in house.
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Not much smell but that's from a guy that sprays paint all day.
Terry
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Yes, Feed n Wax. It's my favorite now, not JUST for radios.
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
TA
What, do you use it as hair conditioner also?
Clancy left the barbershop
with tonic in his hair
he walked into the pool room
and he met O'Reilly there
O'Raille says, "For goodness sake
now do I smell perfume?"
before you could stack
your cue in the rack
Clancy lowered the boom
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Oh....forgot, just got me a quart of GoJo with no pumice.
Will try tomorrow.
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
But never-the-less,
When trouble would press,
Clancy lowered the boom!
I fine old song!!!
I have the Alice Faye
version here on a
few of there radio shows
(Phil Harris/Alice Faye Show.)
Highly recommend their show.
Most are real Nee slappers!!
Ran '46-'53. '49-'51 are the best!!!
Very Funny
Terry
(This post was last modified: 09-07-2013, 07:20 PM by Radioroslyn.)
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
I listen to 40-s on my satellite radio almost every day when going to work or coming back whike in the car. They repeat themselves often, but then I still like it. But once in a while they come up with a new programming.
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
Applied GoJo today.
It improved things a lot.
But there is some residue on the right side that it did not take off. Could be anything from a fruit juice or coffee and milk and to dried up oatmeal.....will need to find out how to take that off.
I wonder if this is where the steel wool 4/0 comes in and helps as I used cloth.
Posts: 7,273
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
You might try putting the GO-JO a bit thicker in that area and leave it go for 15-20 mins before rubbing. That may loosen it up a bit.
Terry
Users browsing this thread:
|
Recent Posts
|
Correct model 84 Ac plug an cord type
|
From what I read Philco went to using brown rubber power cords in 1936, so cloth was used in the 1935 and earlier models...Arran — 11:25 PM |
Correct model 84 Ac plug an cord type
|
Hi Bruce,
I have not worked on an 84, but in general, power cords for almost any radio prior to 1938 was cloth covered...MrFixr55 — 08:34 PM |
Restoring Philco 38-14
|
OK, well, so after staring at the sch again, I realized the problem had to be the #12/12A padder.
I put a scope on the o...morzh — 08:15 PM |
Correct model 84 Ac plug an cord type
|
Hello Bruce,
I mostly use brown far as my cloth powercords go !
Here is the plug that I have used bakelite Acorn style...radiorich — 08:05 PM |
Correct model 84 Ac plug an cord type
|
Looking for as correct as can find the right Ac plug an the correct colored cloth line. Ive seen many old photos but mos...Bruce — 04:13 PM |
Restoring Philco 38-14
|
Rod
Two Y-caps make sense if you use them from L/N to the chassis; this is only makes sense in the transformer radios...morzh — 10:11 AM |
Restoring Philco 38-14
|
Mike, I'm curious about a specific use of he Y cap. Lately I've seen a single cap across the power transformer primary. ...RodB — 09:01 AM |
Restoring Philco 38-14
|
hello morzh ,
That sounds like a plan !
Sincerely Richardradiorich — 07:45 AM |
Restoring Philco 38-14
|
Richard,
It helped some, but I still had the whining when engaging the rear power strip (I did not realize it was fro...morzh — 07:07 AM |
Restoring Philco 38-14
|
Hello morzh,
Yes , that dreaded hum in my room where i do alighment I have my cable modem and router plus desktop plus ...radiorich — 11:25 PM |
Who's Online
|
There are currently no members online. |
|
|