Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

zenith 9s267 question
#1

Have 2 of these, and I noticed one that I re-capped at least a year ago was humming on the station that I listen to frequently.
This radio has not been played since I re-capped it.
Was playing great then.
I noticed that the humm is non-existant on any other station on the dial.
Just the one station has some kind of interference.
I turned off all led and florescent lights in the area and it was unchanged.
Pretty sure it must be something interfering.
Guess I could try moving the radio to a different part of the house and see if that helps.
I know the china made led bulbs interfere big time, as well as my flat screen plasma tv's.
murf
#2

Does the other one also hum on that station when put in the same place? Does moving the radio help?

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

What is the freq. of the station that hums? What is the freq. of your IF? I know a lot of radios get a whistle around 910.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#4

Well I tried other radios and get the same annoying humm on 1130 am.
Something interfering in the area.
This station used to be on fm and then they decided to put sports on the fm station and put the talk radio station on am.
Nothing but problems since then.
Then signal strength get cut in half after about 7:00 in the evening.
Oh well, I guess we all want to listen to sports right?
murf




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently no members online.

>