Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

how do i identify my record player?
#1

I have a 42-1009 (code 122) with a "beam of light" pick-up record player.I would like to find schematics and manuals for this but i can't find any Identification tags on it anywhere. It has the record feature and no speed selection feature if that helps.
Is there anyone out there that can help?

I am also working on a model 60 cathedral (2nd version circa 1934) and can not pick up a signal to save my life. any suggestions on where to start looking?

thank you to anybody who can help
#2

Hi

On the first, if you know it is a 42-1009 then that is all you need. Icon_smile

You can get free schematics from Nostalgia Air, but for much better quality schematics with all pertinent change notes, etc., contact Chuck at the Philco Repair Bench. The fee is reasonable and you won't be disappointed.

Links:
http://www.nostalgiaair.org/
http://www.philcorepairbench.com/schematics.htm

On the Philco 60, have you changed all paper and electrolytic capacitors? Also, the antenna and RF coils are probably bad. You will either have to rewind the primaries yourself (see Chuck's site for details) or have someone such as yours truly rewind them for you.

Edit: Pertinent links for your Philco 60 coils.
http://www.philcorepairbench.com/tips/svctip36.htm
http://www.philcoradio.com/rre/

--
Ron Ramirez
Ferdinand IN
#3

Ron,

I have that 1942 service info.

I mis-read your model number earlier at work while being distracted by work. ;-)

Chuck
#4

Thank you both for taking your time to help me, i would like to say that with your advice and a good parts radio I have been able to sucsessfuly repair my old cathedral, and it sounds great!!! However the work on the old 42-1009 is not going so well, I have had no luck with it.My understanding is that they can be mechanical nightmares at times.
again, thankyou for all of your advice
craig
#5

one more quick question on my cathedral. Are they supposed to pick up short wave bands ? I get nothing but static when i set mine to shortwave, and i didn't know if that was for the now defunct airline/ emergency (police) chanells.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently 4956 online users. [Complete List]
» 4 Member(s) | 4952 Guest(s)
AvatarAvatarAvatarAvatar

>