Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Most Desirable Plastic Philcos
#1

In answer to a question on this subject that was brought up in Old Ron's Bar & Grill, here are a few examples of the most desirable plastic Philco sets.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-10, January 1939
This model was available in different colors.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-11, January 1939

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-21, June 1939 (1940 season)

[Image: http://philcoradio.com/gallery2/images/1...age_01.jpg]
Model PT-35, August 1939 (1940 season)
Note how this model is a clone of the TP-10 above; only the decal is different.
There is also a variant of this model with brown grille, dial pointer and knobs. Other variations in color may exist.

There are others, but the most desirable ones seem to all have Tenite grilles like the four examples above, and usually bring $100-300 or so on our favorite online auction site. Usual disclaimers apply (price depends on condition and/or desirability, not all auctioned radios bring high prices, your mileage may vary, etc.).

--
Ron Ramirez
Ferdinand IN
#2

Would these be bakelite? And the various colors then painted?

Also, what is the durability of the tenite grills?

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

As far as I know, these are Bakelite, with Tenite grilles. As for the variants with bodies in different colors, I've never actually seen one so I can't say whether they are painted Bakelite or other molded plastic. All of the grilles of this style are Tenite, though.

The durability of Tenite is poor. Apparently a few of these have survived fairly well, but that is very unusual for Tenite. Just take a look at a 41-221, for example (quite different grille, but still Tenite) and you will see what I mean. The 41-221 is one of the Philcos that Larry at Old-Time Replications was thinking about reproducing, if you will recall my online poll on that subject.

--
Ron Ramirez
Ferdinand IN
#4

Happy new year everyone,

I just recently purchased a model TP-20. It's brown bakelite with tenite grille bars. Very similar to the TP-10 from 1939 but the TP-20 is, I believe, a 1940 model. I've posted photos on my website:- http://www.tuberadioland.com/philcotp-20_main.html

Regards,
Paul
#5

Paul - you are correct, the TP-20 is a 1940 model, produced between June and August 1939. In August 1939, Philco did away with all of the TP-series sets and reissued some of them with new PT-xx model numbers, adding the PHILCO name (Philco Transitone). Several new Transitones were also introduced at this time.

EDIT: Like all your sets, Paul, your TP-20 looks great! Icon_smile

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>