Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Most Desirable Plastic Philcos
#1

In answer to a question on this subject that was brought up in Old Ron's Bar & Grill, here are a few examples of the most desirable plastic Philco sets.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-10, January 1939
This model was available in different colors.

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-11, January 1939

[Image: http://philcoradio.com/gallery2/images/1...age_00.jpg]
Model TP-21, June 1939 (1940 season)

[Image: http://philcoradio.com/gallery2/images/1...age_01.jpg]
Model PT-35, August 1939 (1940 season)
Note how this model is a clone of the TP-10 above; only the decal is different.
There is also a variant of this model with brown grille, dial pointer and knobs. Other variations in color may exist.

There are others, but the most desirable ones seem to all have Tenite grilles like the four examples above, and usually bring $100-300 or so on our favorite online auction site. Usual disclaimers apply (price depends on condition and/or desirability, not all auctioned radios bring high prices, your mileage may vary, etc.).

--
Ron Ramirez
Ferdinand IN
#2

Would these be bakelite? And the various colors then painted?

Also, what is the durability of the tenite grills?

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

As far as I know, these are Bakelite, with Tenite grilles. As for the variants with bodies in different colors, I've never actually seen one so I can't say whether they are painted Bakelite or other molded plastic. All of the grilles of this style are Tenite, though.

The durability of Tenite is poor. Apparently a few of these have survived fairly well, but that is very unusual for Tenite. Just take a look at a 41-221, for example (quite different grille, but still Tenite) and you will see what I mean. The 41-221 is one of the Philcos that Larry at Old-Time Replications was thinking about reproducing, if you will recall my online poll on that subject.

--
Ron Ramirez
Ferdinand IN
#4

Happy new year everyone,

I just recently purchased a model TP-20. It's brown bakelite with tenite grille bars. Very similar to the TP-10 from 1939 but the TP-20 is, I believe, a 1940 model. I've posted photos on my website:- http://www.tuberadioland.com/philcotp-20_main.html

Regards,
Paul
#5

Paul - you are correct, the TP-20 is a 1940 model, produced between June and August 1939. In August 1939, Philco did away with all of the TP-series sets and reissued some of them with new PT-xx model numbers, adding the PHILCO name (Philco Transitone). Several new Transitones were also introduced at this time.

EDIT: Like all your sets, Paul, your TP-20 looks great! Icon_smile

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 5902 online users. [Complete List]
» 1 Member(s) | 5901 Guest(s)
Avatar

>