Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New idea for insulators
#1

Have found that insulating the wires from the transformers to the tuning capacitor is a problem with Philco's and others that have shields on them.
Also used hem for any wires including power cords that pass thru chassis.
I buy them from McMaster Carr. I am sure there are other suppliers.
Works great if you don't feel like replacing the wires that connect grid caps to chassis.
I just snip one side open so that I can locate it over the wire without disconnecting wire.
Here are a couple pics.

[Image: http://i1161.photobucket.com/albums/q509...rs%201.jpg][Image: http://i1161.photobucket.com/albums/q509...r%20-2.jpg]
#2

Good idea!
#3

Spaghetti? That's been around for 70 years.
#4

I think he means the rubber insulators / grommets
#5

Rubber grommets are quick and easy.
Cut on side and slip over the wire.
Have had wires shorting out on shields due to dried out and brittle wires.
Even after replacing the wires, I like to use them.
murf
#6

     That's a GGreat ideal,,,how about the HEAT from the tube ????
#7

I will monitor that.
Probably different types of rubber that can handle higher temps.
Doesn't seem to damage the rubber coated wire. But then the Philco has cloth covered wire.
murf




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
CT Radio Museum
Hello wjreese, How Cool is that !! I read some history on them and it really sounds like they have nice place and lots...radiorich — 12:27 AM
CT Radio Museum
A great looking museum! Thanks for posting your visit.klondike98 — 11:08 PM
National NC-57 case
I have some of that so I’ll try it. That works great on my Philcos. This radio was a gift from a friend of mine so I’m ...bridkarl — 05:54 PM
National NC-57 case
As far as the cabinet condition, try cleaning it with Goop (non-pumice) hand cleaner and 0000 steel wool. GENTLY! You'l...GarySP — 05:35 PM
National NC-57 case
Yea. I think a repaint is order.  I probably have a spare bandswitch knob somewhere. Since this is an AA-5 type desig...bridkarl — 05:27 PM
Philco model 512
The one I restored had an RCA 100 speaker, the big cast iron one that produced sound from both front and back.RodB — 09:35 AM
National NC-57 case
Not only is the paint chipped out but it has dent that will need to be pushed, or pounded out. The set must have been dr...Arran — 05:09 AM
Philco model 512
There was a 511, (or an updated 1929 model 65 version) Spanish Brown, model in my region, and even though it had obvious...Arran — 06:25 PM
370 Norman Bel Geddes trim pieces
One method that some have used is to get some hardwood dowel, of the appropriate diameter, and cutting a flat onto one s...Arran — 05:03 PM
National NC-57 case
I’m currently recapping this National NC/57. This has a scratch on the case. I guess I can sand this out and just do a s...bridkarl — 01:29 PM

[-]
Who's Online
There are currently no members online.

>