Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

70 speaker
#1

How do you know it is a 70 speaker?
I am buying some speakers and he doesnt remember which are which.

They need re-coning though. Do you want one Fredrick if it needs re-coning?

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

(02-25-2016, 08:10 AM)OldRestorer Wrote:  How do you know it is a 70 speaker?
I am buying some speakers and he doesnt remember which are which.

They need re-coning though. Do you want one Fredrick if it needs re-coning?

Me

Sure Kirk, the 70 speaker will have 3 wires coming off transformer to plug it instead of 4. Four wires are for the 90 with push pull other than that I think they are the same. Also I do have enough speaker grill cloth that you asked about, the gold color chain link pattern. PM me
#3

Doesn't the 20 also have the 3 wires... How do I tell it from the 20?
Message me the total for the grill cloth if you are sure you want to sell it.
Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

The 20 speaker has four wires also has a nut on the back of the field frame.

Steve 

M R Radios   C M Tubes
#5

(02-25-2016, 11:26 AM)OldRestorer Wrote:  Doesn't the 20 also have the 3 wires... How do I tell it from the 20?
Message me the total for the grill cloth if you are sure you want to sell it.
Me
OK Icon_eek I WILL
#6

Well


Nut is not the tell-tell; some of 90 speakers look same as 70 but electrically are like 20 for pushpull version and like 70 in SE.

The 4 wires mean pushpull (20 and some 90s), 3 mean SE, 70 and some other 90s.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 5803 online users. [Complete List]
» 2 Member(s) | 5801 Guest(s)
AvatarAvatar

>