Posts: 135
Threads: 14
Joined: Mar 2016
City: Idaho Falls, Idaho
I haven't really studied the schematic yet, I've looked it over some and the set seems really simple. Unfortunately out west in the rural areas we're limited as to what is available as far as swap meets and hard parts. Maintenance parts are easy to get.
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
In earlier sets like this one, same as in larger radios with more serious acoustics Philco did not use the field coil as the main filter choke (that also would require hum-bucking wire) but did use separate large chokes (also in 20, 70, 90, 16, 116 and its permutations, and all those early consoles whose chassis look similar to yours) that look like a mid-size transformer.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 135
Threads: 14
Joined: Mar 2016
City: Idaho Falls, Idaho
This set takes 3 type 24 tubes, is there a difference between a 24 and a 24A or are they both the same type of tube?
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
The 24A was the replacement for the 24, and as a general rule they can be interchanged except in some Crosley's that used the 24 as an oscillator.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 135
Threads: 14
Joined: Mar 2016
City: Idaho Falls, Idaho
The 24s in this case look to be part of the tuning on the model 77 Philco, I was told there was an amperage difference between the 24s and 24A. In this application am I okay with the 24A or should I continue looking for type 24's?
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
24A's should do fine in your radio. RCA designed them as a direct replacement for the 24's but with some improvements (faster warm-up), except they would no longer work as an oscillator, which the tube was never designed to do in the first place.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 135
Threads: 14
Joined: Mar 2016
City: Idaho Falls, Idaho
So far I have been able to get all the tubes except the 45's which seem to go up in price and get expensive. The other part it is missing is the cover that goes over the top of the type 24 tubes. Is this going to be a hard part to find?
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
You might check with Mark Oppat at this site.
http://www.oldradioparts.net/hardware.html