Posts: 676
Threads: 149
Joined: Jun 2011
City: Elko,MN.
Found a really pristine 38-116 locally for a real good price.
Cabinet looks awesome and the chassis looks like new.
Guy has not played it at all, so he does not if it works or not.
Just a piece of eye candy for his living room.
Don't really need another of these, but the price is right.
Will have to sit next to the other 38-116 or the 37-116 I presently have.
Don't know if I want to re-cap it, or just re-sell for a few extra bucks.
These are a real challenge to work on as you all know.
Will be selling this one as soon as I figure out what it is worth.
In the condition this one is in, it ain't going cheap.
One owner and babied obviously.
Cabinet is awesome. No veneer issues or flaws other than a few very small chips on the edge of the front ledge under the knobs. Very easy touchup with a Q tip.
Chassis is amazing. very,very clean with no rust etc. Transformers all look like new with no tar,scratches etc.
The radio still works to boot. Brought it up on the variac and it plays strong with hardly any noticeable humm.
Does need the switches and bandswitch cleaned as it has not been used for years.
Speaker and clarifiers look like new as well.
Looks like it has the hold downs for the back cover too. No back though.
This is a pristine condition radio perfect for an electronic restoration.
If I can get a good price for it, I will sell it and park it in the Philco row.
Check it out guy's, won't find a nicer one than this.
P.S.
I have not taken the chassis out and looked underneath, but I am sure you will find it is clean and original.
murf
[Image: http://i1161.photobucket.com/albums/q509...-116-8.jpg]
[Image: http://i1161.photobucket.com/albums/q509...20-6_1.jpg]
[Image: http://i1161.photobucket.com/albums/q509...6%20-6.jpg]
[Image: http://i1161.photobucket.com/albums/q509...-116-5.jpg]
[Image: http://i1161.photobucket.com/albums/q509...-116-4.jpg]
murf [Image: http://i1161.photobucket.com/albums/q509...-116-3.jpg]
[Image: http://i1161.photobucket.com/albums/q509...6%20-2.jpg]
[Image: http://i1161.photobucket.com/albums/q509...38-116.jpg]
(This post was last modified: 04-12-2016, 09:08 PM by murf.)
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
A 38-116 for a good price that is pristine should not be passed up.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 711
Threads: 46
Joined: Sep 2009
City: Lapeer, MI
State, Province, Country: USA
Congrats on your find. Pictures please!
Courage will follow when Faith takes the lead.
Posts: 136
Threads: 38
Joined: May 2015
City: Brandon, SD
Was this the one for sale on craigslist located in Stillwater for $100 or best offer?
Posts: 5,650
Threads: 56
Joined: Sep 2008
City: Sandwick, BC, CA
If it's in pristine original condition why not keep this one and trade or sell the 38-116 you already own that's no so pristine? At least that's what I would do, cycle in the set in better original condition, and cycle out the other in favor of a 16B or something?
Regards
Arran
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Better yet swap the chassis so one is both pristine and works. Unless the other chassis is much better looking one.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 676
Threads: 149
Joined: Jun 2011
City: Elko,MN.
Hi guy's,
I am considering both options presently.
The other one that I have has a very nice cabinet and finish as well.
I read on here before that this radio in average condition is worth in the $300-$400 range.
Not sure if that is re-capped or not re-capped.
Can you guy's enlighten me?
I know you can find them once in a while for $100 with an average condition cabinet and non working.
Re-capped has to add significant value to one of these due to the complexity of the chassis.
And then I have seen others that are re-capped and re-finished for ridiculous asking prices.
Opinions welcome.
murf
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Murf
It may add value if the right buyer comes along. For me it at best does not change it, at worst, if the recap is done without restuffing, it reduces it. In any case I would like to do my recapping myself.
Some people would like for someone to do it for them, they might pay more.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
That is one nice radio Murf. Having some options on what you want to do is always good.
I found a 37-116 on craigs list last year for 100.00. It has had the ecaps changed and that's all so far.
Hope to get to it in the near future, I don't play it though it does play, till I recap it.
Good luck with what ever you decide.
(This post was last modified: 04-13-2016, 06:34 PM by KCMike.)
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Posts: 676
Threads: 149
Joined: Jun 2011
City: Elko,MN.
Looks nice. Bet you wouldn't sell it for what you paid?
murf
(This post was last modified: 04-17-2016, 09:02 AM by murf.)
Posts: 136
Threads: 38
Joined: May 2015
City: Brandon, SD
That's crazy, my 37-116 has the same wear over the same two control knobs. My is in very similar condition and I paid $85 for it last fall. Won't sell it but of I did it wouldn't be for 4 or 5 times what I payed for it. I don't see this hobby as a way to make money so much as a way to bring back and preserve history. It's not about the $$$. It's about putting them in the hands of people that will use and enjoy them.
Posts: 676
Threads: 149
Joined: Jun 2011
City: Elko,MN.
Hi SD,
I agree.
I buy some to keep for my own collection, and I buy some to repair and sell for a profit.
What I enjoy the most is getting the radio home and getting it playing again.
I learn a little more with each one.
Each one is a training excersize for me.
murf
Posts: 5,650
Threads: 56
Joined: Sep 2008
City: Sandwick, BC, CA
(04-13-2016, 04:04 PM)murf Wrote: Hi guy's,
I am considering both options presently.
The other one that I have has a very nice cabinet and finish as well.
I read on here before that this radio in average condition is worth in the $300-$400 range.
Not sure if that is re-capped or not re-capped.
Can you guy's enlighten me?
I know you can find them once in a while for $100 with an average condition cabinet and non working.
Re-capped has to add significant value to one of these due to the complexity of the chassis.
And then I have seen others that are re-capped and re-finished for ridiculous asking prices.
Opinions welcome.
murf
The $300-$400 would be for an electrically restored set I believe (verified restored of course) , they are not rare enough to be worth that for an unrestored example, even with a decent finish on the cabinet, since someone who wants one can always wait until another unrestored 37 or 38-116 shows up for a better price. When you mention one being listed for a ridiculous asking price I gather that was from Grand Canyon Tube Radio or some similar online boutique. He has had a 37-10 and a 38-116 on there for sale for at least 16 years, both with the wrong grille cloth, incorrectly refinished, no decals, and the dial escutcheon polished, for four figures each.
Regards
Arran
(This post was last modified: 04-15-2016, 12:17 AM by Arran.)
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Who's Online
|
There are currently 1559 online users. [Complete List] » 4 Member(s) | 1555 Guest(s)
|
|
|
|

|