Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

37-116 Standard vs. Deluxe?
#1

How much rarer is the stardard verson versus the deluxe version in the 37-116 console? You very rarely see the standard version.
#2

No production figures exist which break down the numbers of 37-116 Standard vs. De Luxe production; Philco lumped them all together (35,000 total).

If I had to guess, I would say the ratio of standard to De Luxe models is somewhere between 1:6 and 1:12. Probably closer to the latter. Clearly Philco made many more De Luxe 37-116 than standard 37-116 sets.

--
Ron Ramirez
Ferdinand IN
#3

Would one be worth pursuing for at a 3 hour drive and $125? Cabinet is in great condition. Don't know if it works.
#4

Yes I would even if it were Deluxe version.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

I'm actually picking up my second 37-116 deluxe tomorrow for $100. Just wondering if a standard would be a good addition to the twins, then I'd have triplets of the 37-116.
#6

Seems like I read somewhere that the std was only made for the first 6 months of production. There are a few different version of these sets (37-116 delux). Early ones have push pins to connect the spkr. Later have a socket/plug. Most have 6B4 tubes but the very late ones have 6A5G and the later ones a different LO circuit, less trimmers.

Terry
#7

I would definitely go for a standard for $125 and 3 hours of driving!
#8

Either version is worth the trip for $125-.

- Geoff




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 40-120C Restoration
Not my radio just trying to help. DavidDavid — 02:48 PM
Philco 91 Restore Code ??
Thanks Rod. Since the screen grid is not tied to the plate then my tubes are pentode right? I see the candohm ties to th...dconant — 02:29 PM
Philco 91 Restore Code ??
Yes, you can look at the schematic. When the output tube screen grid is connected directly to the plate then it's wired ...RodB — 01:51 PM
Philco 91 Restore Code ??
Can someone tell me if my 42 tubes are connected triode or pentode in fixed or cathode bias? How could I tell by looking...dconant — 10:47 AM
Philco 40-120C Restoration
Hello David, that is great news about the tubes source being local ! Sounds like you got good start on the radio . ...radiorich — 09:41 AM
An attempt to remove the Field Coil from a G speaker
Mike; I've only run into a speaker with an open filed coil twice, and they were on newer speakers from the 1940s. One ...Arran — 12:48 AM
An attempt to remove the Field Coil from a G speaker
Arran Yes, this is my plan for now and what do I got to lose, this is not even the speaker from this radio, but one o...morzh — 10:44 PM
An attempt to remove the Field Coil from a G speaker
Mike;  I would unwrap the field coil, and see if maybe there a break near one of the ends, like where the coil wire att...Arran — 10:23 PM
An attempt to remove the Field Coil from a G speaker
...and this is what I did. I fed a little LT into the screwholes with a small brush, and a little on the rim next to the...morzh — 09:52 PM
Philco 40-120C Restoration
I combined the two 40-120C threads together as we like to keep the discussion of the same radio together. It helps with...klondike98 — 09:36 PM

[-]
Who's Online
There are currently 2027 online users. [Complete List]
» 2 Member(s) | 2025 Guest(s)
AvatarAvatar

>