Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

I actully fixed something!!!
#1

At ktown I got an Admiral 7T10 from1950 or so. Took a quick look at it look it in last night. Popped it out of the cabinet to find that the filters where replaced. Turned it on and tubes lit but no sound at all. Wiggled the output tube and nothing. Checked plate voltage 0. That makes sense. Output transformer was open. Have a test spkr w/a transformer so I hooked that up and it was playing sort of. Went to bed. This afternoon I went down to the basement and found a suitable replacement transformer and installed it Set was playing but the tuning was way off and didn't have the volume that it should. Upon closer inspection someone had wired the loop ant across the two stator sections of the tuning cap, connecting the ant and osc sections together. Once removed and wired correctly stations where they should be and has good volume.
http://www.radioatticarchives.com/radio.htm?radio=113

One down a million more to go!
Terry
#2

Mr. Speedy Gonzalez Icon_smile

Wow Terry, after all this you have energy to fix something this quick!
(I have just restuffed one cap of my 38-12 and drilled out the transformer, this is the extent today).

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Energy? With all that lifting and moving and... Oh wait... Sitting there Icon_lol
Do you hear this Sam? He had the energy to fix a radio when he got home... Icon_smile
I died until today when the phone rang... right Terry! Icon_lol

I am glad you fixed it... I could not so bye bye it went Icon_smile

Me

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

I have heard those Admirals have plenty of volume and soud decent for a small 5 toober. Does it have a 4 or 5 inch speaker?

Paul

Tubetalk1
#5

(05-15-2016, 08:26 PM)Paul Philco322 Wrote:  I have heard those Admirals have plenty of volume and soud decent for a small 5 toober. Does it have a 4 or 5 inch speaker?

Paul

It does sound good for an AA5. The original transformer was pretty wimpy not many lamination at all. That's done by design because the less low frequency response the less filtering in the power supply you'll need. That's why a lot of these AA5's have small spkrs so it doesn't reproduce the 60cy hum so much. Replacement was a bit better. I think it was a 5" spkr.

Terry
#6

Terry;
  I have one of those Admirals, but it was assembled in Hamilton, Ontario rather then Chicago, it was one of the earlier sets in my collection and one of the few from that period that I still own.
Regards
Arran
#7

I thought I'd revisit the Admiral. Have been using it but the audio sounds a bit muffled. I quick look at the schematic shows why. It has a rather large cap across the primary of the output transformer. Changed that for a smaller one and added a bypass cap to the cathode of the 50A5. This adds a little bit of audio gain and increases the low frequency response. A lot of AA5's don't have a cap there because it adds to the cost and it can make 60cy hum sound worst. I did add an extra 47mfd to the filter making a total of 141mfd originally it had 80.
It's playing nice and loud now with a much brighter sound. Have been using to listen the a local station that plays otr on Sat nights so I'm all set.
http://www.nostalgiaair.org/pagesbymodel...000212.pdf


Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

That sounds so nice, glad it turned out. I have had a beast of  day and before burnig up some burgers I have a 5 tube Westinghouse on the Old Music Station up here and am havig a lager. So a little rest and relax. It was hot as a ******* up here today, had to jump a guys battery outside my work today, cat peed on my son's new sneakers, does it get better?

I like Admiral, generally pretty good before it all went overseas. Simple sets for simple people like me!

Americas Smart Set!

Paul 

Tubetalk1
#9

I thought yous guys had permanent air conditioning up there!!!!

Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM
Philco 41-608 changer coupler
3D-printing...short of machining, of course. Or molding.morzh — 05:20 PM
Philco 41-608 changer coupler
Thanks, Morzh. That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM
12' Philco
If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel. Kareem would have an e...morzh — 01:48 PM
12' Philco
And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM
Hickok AC51 tube tester
I think they have only shown the secondaries of the transformer. Two of them feed the rectifiers' filaments.morzh — 12:58 PM
IF can wire size and Rubber mounts?
Arran If the wire inside cans is the gauges you mentioned, the sole reason for that would be mechanical, to stiffen t...morzh — 12:56 PM
12' Philco
Rod, Yes, I know, but the Giant Philco is not around anymore either, so I go by whoever was alive fairly recently. H...morzh — 12:54 PM
Hickok AC51 tube tester
Absolutely no one is going to reverse engineer that circuit. Even the iron core is missing.RodB — 10:37 AM
IF can wire size and Rubber mounts?
Thanks to both members for your help regarding wire and tuner mtg supports. regards--Johngeorgetownjohn — 09:33 AM

[-]
Who's Online
There are currently 5399 online users. [Complete List]
» 2 Member(s) | 5397 Guest(s)
AvatarAvatar

>