Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
After two years my 118 is done. Came out pretty good. Original grille cloth. It plays very nicely. Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
[Image: http://i614.photobucket.com/albums/tt228...bd9f54.jpg]
Steve Chambers
(This post was last modified: 06-12-2016, 04:03 PM by Steve Chambers.)
Posts: 1,874
Threads: 212
Joined: May 2015
City: Seattle
State, Province, Country: WA
I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job! 
Posts: 85
Threads: 13
Joined: Jul 2015
City: Rockville, MD
Beautiful job! I have one of those around here somewhere to get to some day. Hope there's no faux finish on it anywhere. Ed
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Thanks!
All real wood on this one.
Steve Chambers
(This post was last modified: 06-12-2016, 04:01 PM by Steve Chambers.)
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
(06-12-2016, 03:45 PM)Nathan Slingerland Wrote: I see only one image - it looks like maybe there were others?
But whatever - I can see you did a beautiful job!
Only one. I don't know how that other stuff got in there or how to remove it.
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Great job.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Congratulations ! It looks great.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
That turned out beautiful
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 5,091
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Posts: 80
Threads: 10
Joined: Sep 2005
City: Warren, Ohio
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
...I still only see one image...
But hey, Steve, congratulations on a great job!
--
Ron Ramirez
Ferdinand IN
Posts: 77
Threads: 24
Joined: Nov 2010
City: Oradell, NJ
06-16-2016, 03:27 PM
(06-12-2016, 03:37 PM)Steve Chambers Wrote: Someone had modified the set to work with a loop antenna. Fortunately, the antenna coil was still there, just disconnected.
I've been guilty of doing that,  but I leave the antenna coil for a subsequent owner to restore it later if they want to, just like with your radio. I sometimes use a ferrite rod hidden inside.
Posts: 157
Threads: 12
Joined: Dec 2012
City: Seattle, WA
Beautiful! High on my list of Philcos to have, kinda surprised it's eluded me so long. But, here's to hoping!
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco Model 80 Transformer resistance
|
| Just forget this number, it is useless anyway.
Simply proceed with your project.morzh — 10:08 PM |
|
Philco Model 80 Transformer resistance
|
| My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM |
|
Philco Model 80 Transformer resistance
|
| Thanks for the quick reply!
Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM |
|
Philco Model 80 Transformer resistance
|
| The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM |
|
Philco Model 80 Transformer resistance
|
| I have a feeling the primary winding on the power transformer is bad. My resistance reading on the primary side is 9 ohm...Mike L — 07:48 PM |
|
Rusty Tuning Condenser
|
| I would try Naval Jelly and use a soaked pipe cleaner to get it where it needs to go.RossH — 06:56 PM |
|
38-10T chassis Restoration begins
|
| Hello Dconant ,
they sold mica to use as a insulator between transistors and their heatsinks too.
Rob I will remove th...radiorich — 02:52 PM |
|
38-10T chassis Restoration begins
|
| Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM |
|
38-10T chassis Restoration begins
|
| Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM |
|
38-10T chassis Restoration begins
|
| It is acceptable but not desirable.
Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM |
|
Who's Online
|
There are currently 3256 online users. [Complete List]
» 1 Member(s) | 3255 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")